Blaze Cut Install in 68 Bay

[jeridmark]

Does any of you have pics or recommendations on how to install the blaze cut system in a 68. I don't have an engine compartment hatch. Any advice is very appreciated. Thank you

[SGKent]

do you have one or are you trying to find out what is needed to do the whole thing? There have been a few threads here on thesamba from folks who wanted that device.

https://www.thesamba.com/vw/forum/viewtopic.php?t=687124&highlight=blazecut

https://www.thesamba.com/vw/forum/viewtopic.php?t=565193

https://www.thesamba.com/vw/forum/viewtopic.php?t=539670&highlight=blazecut

https://www.thesamba.com/vw/forum/viewtopic.php?t=719362
_________________
“Most people don’t know what they’re doing, and a lot of them are really good at it.” - George Carlin

[aeromech]

I’ve installed a couple. One recently in a Vanagon but the other was in a 1968 bus. That was about 5 years ago. Basically you tie wrap it to the ceiling in a spiral

The blaze cut was donated by KentPS to Cynthia

_________________
Lead Mechanic: San Diego Air and Space Museum
Licensed Airframe and Powerplant Mechanic
Licensed Pilot (Single engine Land)
Boeing 727,737-200-300-400,757,767
Airbus A319,320,321
DC9/MD80
BAe146
Fokker F28/F100
VW type 1 1962,63,65,69,72
VW Type 2 1971 (3 ea.) 1978, 1969
VW Jetta
VW Passat
Capable of leaping tall buildings in a single bound

[jeridmark]

That looks great! I like the use of the sheet metal. I thought the install was going to be super easy. Thanks for the inspiration.

[wagohn]

I just installed this for $29 (on sale at purchase). Possibly junk, but a new challenger to Blaze Cut - Jogoswall Automatic Fire Extinguisher. Installed in less than 5 mins. Supposedly lasts 10 years:

https://www.amazon.com/dp/B095S3L4GT?psc=1&ref=ppx_yo2ov_dt_b_product_details

_________________
1976 VW Transporter, 2.0 FI Engine