Author |
Message |
jdamato Samba Member
Joined: December 22, 2008 Posts: 24 Location: jacksonville fl
|
Posted: Mon Feb 23, 2015 9:30 pm Post subject: I Need Some Doors |
|
|
Greetings, I just picked up a 1960 single cab project but it is missing the doors. Does anybody have any leads to where I could find a set? It appears they are hard to come by. |
|
Back to top |
|
|
Pinetops Samba Member
Joined: March 24, 2007 Posts: 2987
|
Posted: Mon Feb 23, 2015 9:47 pm Post subject: |
|
|
Check the classifieds and vw shows. _________________ "A rolling bus gathers no rust." |
|
Back to top |
|
|
electronictofu Samba Member
Joined: May 13, 2009 Posts: 935 Location: Sacramento
|
Posted: Mon Feb 23, 2015 10:48 pm Post subject: |
|
|
Mine are modified but rust and rot free (65 deluxe), i'd let them go at a good price. Otherwise there's of some in the classifieds. Private message me if your interested. Goodluck on the hunt! |
|
Back to top |
|
|
EverettB Administrator
Joined: April 11, 2000 Posts: 69823 Location: Phoenix Metro
|
|
Back to top |
|
|
jdamato Samba Member
Joined: December 22, 2008 Posts: 24 Location: jacksonville fl
|
Posted: Tue Feb 24, 2015 5:29 am Post subject: |
|
|
Sorry about the misplaced topic, please excuse my ignorance. A better question would be what year door should I be looking for? I am not familiar with buses at all. |
|
Back to top |
|
|
55samba Samba Member
Joined: June 21, 2002 Posts: 805 Location: CA Bay Area
|
|
Back to top |
|
|
srfndoc Samba Member
Joined: August 21, 2010 Posts: 3275 Location: SoCal
|
Posted: Tue Feb 24, 2015 8:32 am Post subject: |
|
|
Gerson is coming out with new/reproduction doors as well. I would check with him to see where he is at with those. _________________ RPM=(MPH*336* (R&P*4th*1.26))/Tire Diameter in inches |
|
Back to top |
|
|
EverettB Administrator
Joined: April 11, 2000 Posts: 69823 Location: Phoenix Metro
|
Posted: Tue Feb 24, 2015 8:38 am Post subject: |
|
|
jdamato wrote: |
Sorry about the misplaced topic, please excuse my ignorance. A better question would be what year door should I be looking for? I am not familiar with buses at all. |
Ok, I understand. This is a good question as there are various door changes.
Ideally you want a 56-early 1961 door.
One that has a "flat" area for the door handle to mount.
Flat
Indented
1955 is the same too but there have been some comments that the '55 door has a slightly different shape. _________________ How to Post Photos
Everett Barnes - [email protected] | My wanted ads
"Water is the only drink for a wise man" | "Communication prevents complaints"
Stop dead photo links! Post your photos to The Samba Gallery! |
|
Back to top |
|
|
jdamato Samba Member
Joined: December 22, 2008 Posts: 24 Location: jacksonville fl
|
Posted: Tue Feb 24, 2015 12:09 pm Post subject: |
|
|
Thanks a lot guys, that is exactly what I was looking for. |
|
Back to top |
|
|
iamdonquixote Samba Member
Joined: January 28, 2003 Posts: 2041 Location: M*ssholia
|
Posted: Tue Feb 24, 2015 2:32 pm Post subject: |
|
|
55samba wrote: |
When looking pay attention to rust at the bottom and hinge damage. Lower hinges seem to be the worst from my experience. You wont find many (or any) that are perfect. But these are the typical trouble spots.
If the door has been stripped of its parts a 60 and down door is the easiest to buy parts for. WW has the latch mechanisms for cheep. |
very good advice. Doors can look good but can have broken hinges. Look at the riveted area for cracks. With prices as high as they are for doors in the classified, I'd want them to be workable at least. |
|
Back to top |
|
|
ezcamper Samba Member
Joined: January 10, 2001 Posts: 897 Location: Atlantic Beach, FL
|
Posted: Tue Feb 24, 2015 2:50 pm Post subject: |
|
|
Check will Hilltop Motors in Jacksonville, FL. Post a wanted as on Craigslist and thesamba. _________________ I make HWE style roof racks, Jim-Dandy racks, SO-33 metal parts, Dormobile racks, HWE style ladders, engine crank start handles, Westy rack tags, Binz tags, Sundial badges, State of California tags, steering lock electrical covers and single / double cab gate latch friction blocks.
instagram is http://instagram.com/bullidriversteelworks |
|
Back to top |
|
|
|