| Author |
Message |
FRNKNSTNGHIA
Samba Member
Joined: March 05, 2010
Posts: 411
Location: Kissimmee, FL
|
 Posted: Mon Oct 22, 2012 4:56 pm Post subject: Re-Drill Rotors/Drums |
 |
|
| I have 70 IRS Ghia with Discs up front and drums out back. Clearly the bolt pattern is 4x130mm. My question is can I have the rotors/drums drilled and tapped for 4x100 or 5x100. Or do I have to buy blank rotors/drums to do this? I am concerned with the integrity of the rotor/drum. My friend said it should be fine as long as they fill the other holes. Any ideas on how much this would cost? |
|
| Back to top |
|
 |
Joel
Samba Member
Joined: September 04, 2006
Posts: 11099
Location: NSW Australia
|
| Posted: Tue Oct 23, 2012 3:10 am Post subject: |
|
|
Blanks is a better option but 4x100 and 5x100 fits inside the stock holes although with 5x100 most of the holes miss the 4 strengthening ribs
_________________
Quick little bug, you got a Porsche motor in that?
1974 Germanlook 1303 2.5 Suba-Beetle |
|
| Back to top |
|
|
JWP80
Samba Member
Joined: July 11, 2012
Posts: 400
Location: First Capitol, OK
|
| Posted: Tue Oct 23, 2012 9:30 am Post subject: |
|
|
| Joel wrote: |
| Blanks is a better option but 4x100 and 5x100 fits inside the stock holes although with 5x100 most of the holes miss the 4 strengthening ribs |
I agree with him, toplineparts.com charges 55 per rotor/drum to do this.
CIP1 some times has rotor/drums already in that pattern. |
|
| Back to top |
|
|
Mike Fisher
Samba Member
Joined: January 30, 2006
Posts: 17969
Location: Eugene, OR
|
| Posted: Tue Oct 23, 2012 9:35 am Post subject: |
|
|
flyinglow94 in Las Vegas only charges $30 each to drill and tap your original components I think. 
_________________
https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold
Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey |
|
| Back to top |
|
|
|
