Author |
Message |
squareonair Samba Member
Joined: February 11, 2005 Posts: 990 Location: springfield,missouri
|
Posted: Sun Dec 09, 2012 9:37 pm Post subject: Intake |
|
|
i know this is no good with out pictures but i just havnt had time to take any just yet...but digging thru some stuff this past weekend i ran across some odd ball looking intakes...allunium...looks to be on one end there 36hp and on the other end they match up to a 34pict carb...they look well fabbed together....each one has a slight lean to them so there is a left and right to miss the doghouse..i just never seen anything like this before and i was wondering if anyone else had heard about something as well... _________________
dcdubs wrote: |
"if you stash it they will come"
vw field of dreams |
|
|
Back to top |
|
|
squareonair Samba Member
Joined: February 11, 2005 Posts: 990 Location: springfield,missouri
|
Posted: Tue Dec 11, 2012 1:32 pm Post subject: |
|
|
_________________
dcdubs wrote: |
"if you stash it they will come"
vw field of dreams |
|
|
Back to top |
|
|
djway3474 Samba Member
Joined: August 19, 2011 Posts: 2582 Location: The Real NDK So Cal
|
Posted: Wed Dec 12, 2012 12:52 am Post subject: |
|
|
I would think a straight shot into the head would provide better mix and with that much leverage I would worry about failure of the weld with out a brace. On the other hand it would look unique |
|
Back to top |
|
|
Jon65 Samba Member
Joined: September 29, 2012 Posts: 2417
|
Posted: Wed Dec 12, 2012 3:02 pm Post subject: |
|
|
I think I remember seeing an old brochure for a carb kit that placed the carbs a little behind the shroud to clear the carbs, but I can't remember it. I think that this is something completely different. |
|
Back to top |
|
|
squareonair Samba Member
Joined: February 11, 2005 Posts: 990 Location: springfield,missouri
|
Posted: Wed Dec 12, 2012 3:40 pm Post subject: |
|
|
im not sure what they are...one end matches great with 36 heads..and other end matches up to a dp 34 intake...but looking at it the 34's would set sidways _________________
dcdubs wrote: |
"if you stash it they will come"
vw field of dreams |
|
|
Back to top |
|
|
Manx1173 Samba Member
Joined: July 19, 2005 Posts: 146 Location: Missouri
|
Posted: Wed Dec 12, 2012 4:07 pm Post subject: |
|
|
squareonair wrote: |
im not sure what they are...one end matches great with 36 heads..and other end matches up to a dp 34 intake...but looking at it the 34's would set sidways |
Would they fit Weber 34 icts or possibly 32 PDSIT carbs from a type 3? |
|
Back to top |
|
|
squareonair Samba Member
Joined: February 11, 2005 Posts: 990 Location: springfield,missouri
|
Posted: Wed Dec 12, 2012 4:42 pm Post subject: |
|
|
Manx1173 wrote: |
squareonair wrote: |
im not sure what they are...one end matches great with 36 heads..and other end matches up to a dp 34 intake...but looking at it the 34's would set sidways |
Would they fit Weber 34 icts or possibly 32 PDSIT carbs from a type 3? |
i didnt try any... _________________
dcdubs wrote: |
"if you stash it they will come"
vw field of dreams |
|
|
Back to top |
|
|
|