1970 ignition wire no indicators or full beam

[lil_azza]

So i have a 1970 early bay us model
Iv done the wiring so many times to different diagrams etc still no luck
No indicators or full beam
But i took my ignition out to get a new key as i lost mine
I dont have a wire going onto a terminal,
What isit and where does it go to?
Pictures for reference

[Tcash]

There is no wire on D.

1970 Ignition Switch Removal

ignition barrel on Type 2's

Drilling the ignition lock

Dip problem is usaully
Bad connection at Dip relay.
Bad dip Relay.
Dip switch in turn signal switch.

Key on lights on. Ground the brown wire from the dip relay. If it switches to the brights. Problem is in the dip switch or wiring to it.

Pictures would be cool.
How to post photos/How to post a photo in the Forums
Post a picture of your fuse box.

Good Luck
Tcash

[lil_azza]

Ok thanks,
No sorry the pics are taken from else where to show the terminal i have it all out
Il try ground that wire n see how i get on cheers

[Tcash]

The brown wire is the key in the ignition buzzer.
Letter D terminal s.
http://www.thesamba.com/vw/archives/info/wiring/baybus_70.jpg

1970 headlight wiring diagram
http://www.thesamba.com/vw/archives/info/wiring/1970bus_schematic_headlights.jpg

Wiring diagrams
http://www.thesamba.com/vw/archives/info/wiringt2.php

Good luck
Tcash

[lil_azza]

Right ok so i dont have a buzzer il leave that bit out
Thanks mate il tackle it again tonight

[lil_azza]

So it turns out my switch is broken for the turn signals
Best go find another:(