| Author |
Message |
PedalWerks
Samba Member
Joined: January 16, 2005
Posts: 219
Location: San Bernardino SoCalif
|
 Posted: Tue Apr 23, 2013 5:28 pm Post subject: Barndoor Pedal Parts |
 |
|
Hello, I have made the bushings but I am in need of the Accelerator ( #72)and Brake pedal return springs (#53), are these available or can someone send me the length of these collapsed (unhooked)
I would be forever greatfull, Thanks Scott
_________________
Nothing Exceeds Like Excess!!!
www.pedalwerks.com
@pedalwerksdotcom
909-289-9655
12' Golf 2.5
07' Rabbit 2.5
59' Single Cab
57' Oval hard top
55' Oval hardtop |
|
| Back to top |
|
 |
RockStock
Samba Member
Joined: November 26, 2004
Posts: 3924
Location: England
|
| Posted: Wed Apr 24, 2013 2:08 pm Post subject: |
|
|
Scott
Here you go
From a lhd 54/55...appear original
Throttle spring is feeble
Brake spring is sturdier
Worth noting the orientation of the hooks
Dimensions are approximate
Now can't put everything back together
Regards
RS
_________________
-StockRocks- |
|
| Back to top |
|
|
PedalWerks
Samba Member
Joined: January 16, 2005
Posts: 219
Location: San Bernardino SoCalif
|
| Posted: Wed Apr 24, 2013 2:32 pm Post subject: |
|
|
Thank You very much, Scott
_________________
Nothing Exceeds Like Excess!!!
www.pedalwerks.com
@pedalwerksdotcom
909-289-9655
12' Golf 2.5
07' Rabbit 2.5
59' Single Cab
57' Oval hard top
55' Oval hardtop |
|
| Back to top |
|
|
PedalWerks
Samba Member
Joined: January 16, 2005
Posts: 219
Location: San Bernardino SoCalif
|
| Posted: Wed Apr 24, 2013 5:38 pm Post subject: Thanks |
|
|
Please PM me your Shipping address and I will send you a set of bushings for the pedals, no charge, I have just made these in my shop Pedal Werks,
Value $100 plus shipping
Scott
_________________
Nothing Exceeds Like Excess!!!
www.pedalwerks.com
@pedalwerksdotcom
909-289-9655
12' Golf 2.5
07' Rabbit 2.5
59' Single Cab
57' Oval hard top
55' Oval hardtop |
|
| Back to top |
|
|
RockStock
Samba Member
Joined: November 26, 2004
Posts: 3924
Location: England
|
| Posted: Thu Apr 25, 2013 8:42 am Post subject: |
|
|
thanks Scott
update the thread if you find some good replacement springs!
_________________
-StockRocks- |
|
| Back to top |
|
|
peter schepens
Samba Member
Joined: April 17, 2003
Posts: 1014
Location: belgium Caesars camp
|
| Posted: Thu Apr 25, 2013 9:52 am Post subject: |
|
|
I know nothing on barndoors but the spring looks like the one used in a beetle brake system inside the drums . I am only guessing but it could be plausible...they used what they could find to start with...remeber they started with a beetle floorpan to make the prototype
_________________
Zelensis, glassfibre body made in Belgium , disigned and built on a VW platform About 25 body's built.
Hebmuller info wanted for http://www.hebmueller-registry.com/home.html |
|
| Back to top |
|
|
EverettB 
Administrator
Joined: April 11, 2000
Posts: 69804
Location: Phoenix Metro
|
| Posted: Thu Apr 25, 2013 4:12 pm Post subject: |
|
|
I agree they look similar but they have 211 part #s so they are probably Bus parts.
My guess would be they are weaker than brake springs.
Brake spring, #53:
211 719 147
Return spring - Brake Pedal
Accelerator pedal spring, #72:
211 719 525
Return spring - Accelerator Pedal
_________________
How to Post Photos
Everett Barnes - [email protected] | My wanted ads
"Water is the only drink for a wise man" | "Communication prevents complaints"
Stop dead photo links! Post your photos to The Samba Gallery! |
|
| Back to top |
|
|
pipvan
Samba Member
Joined: November 19, 2012
Posts: 46
Location: UK
|
| Posted: Tue May 28, 2013 7:49 am Post subject: brake/clutch pedal shaft |
|
|
Hi all i require item 47 and the bushes can anyone help out please, im also after the main kingpin and bushes on the front beam aswell if anyone has anything.
Thanks Phill |
|
| Back to top |
|
|
pipvan
Samba Member
Joined: November 19, 2012
Posts: 46
Location: UK
|
| Posted: Wed May 29, 2013 12:52 pm Post subject: |
|
|
| Anyone help out please |
|
| Back to top |
|
|
EverettB
Administrator
Joined: April 11, 2000
Posts: 69804
Location: Phoenix Metro
|
|
| Back to top |
|
|
Gerson
Samba Member
Joined: January 23, 2004
Posts: 1828
Location: Jupiter Fl
|
| Posted: Thu May 30, 2013 6:31 am Post subject: |
|
|
I make the shaft, the bushings, and I can have the springs made at a spring shop near my factory.....email me and let me know what you need....I am going down to Bogota on Monday...let me know...
_________________
that's not patina, that's fucking rust man!!!!
we (klassicfab) make the funky green panels........... |
|
| Back to top |
|
|
HUGOPECAS
Samba Member
Joined: February 07, 2009
Posts: 36
Location: PORTUGAL
|
| Posted: Mon May 08, 2017 1:18 am Post subject: |
|
|
| RockStock wrote: |
Scott
Here you go
From a lhd 54/55...appear original
Throttle spring is feeble
Brake spring is sturdier
Worth noting the orientation of the hooks
Dimensions are approximate
Now can't put everything back together
Regards
RS |
Hi, first off all, thanks for this post is very useful!
One question, how is the stiffness of the springs, they are like the one of the brake system inside the drums?
Regards
Hugo |
|
| Back to top |
|
|
joshbuchan
Samba Member
Joined: April 12, 2007
Posts: 712
Location: victoria bc canada
|
| Posted: Thu May 11, 2017 3:27 pm Post subject: Re: Barndoor Pedal Parts |
|
|
| we made both springs for the 54 panel recently.....have limited number of spares but could make a couple dozen if there is enough interest? |
|
| Back to top |
|
|
joshbuchan
Samba Member
Joined: April 12, 2007
Posts: 712
Location: victoria bc canada
|
| Posted: Fri May 12, 2017 3:09 pm Post subject: Re: Barndoor Pedal Parts |
|
|
I've had a few guys contact me about springs.....guess I should do up an ad? They were copied off of good originals and match the spec of pics in this thread. I'll snap some pics soon, a jig was machined to wind on the lathe. We just road tested in a 3500 plus mile roadtrip from Canada to Kelly park and worked great  will be selling for $20 USD each spring plus shipping let me know if interested, thanks Josh |
|
| Back to top |
|
|
joshbuchan
Samba Member
Joined: April 12, 2007
Posts: 712
Location: victoria bc canada
|
| Posted: Wed May 31, 2017 8:22 pm Post subject: Re: Barndoor Pedal Parts |
|
|
Sorry guys these are taking longer than expected.....after hours time has been at a premium lately  getting there |
|
| Back to top |
|
|
TheGermanJunkies
Samba Member
Joined: May 04, 2016
Posts: 3
Location: Surrey, UK
|
| Posted: Thu Jun 08, 2017 8:42 am Post subject: Re: Barndoor Pedal Parts |
|
|
Hi I really need a left hand drive brake pedal return spring as soon as possible please if you can help? Let me know and I can send payment. I am in the UK.
Many thanks Seb |
|
| Back to top |
|
|
spit nolan
Samba Member
Joined: March 08, 2005
Posts: 123
Location: redditch, united kingdom
|
| Posted: Sun Jun 11, 2017 12:04 pm Post subject: Re: Barndoor Pedal Parts |
|
|
Anyone have the details for the same but for a RHD barndoor?
_________________
1963 Squareback
1967 Porsche 912
RSVP VW |
|
| Back to top |
|
|
joshbuchan
Samba Member
Joined: April 12, 2007
Posts: 712
Location: victoria bc canada
|
| Posted: Tue Jun 13, 2017 11:13 am Post subject: Re: Barndoor Pedal Parts |
|
|
| spit nolan wrote: |
| Anyone have the details for the same but for a RHD barndoor? |
As in if the springs are the same from RHD to LHD? Don't see why not?? |
|
| Back to top |
|
|
spit nolan
Samba Member
Joined: March 08, 2005
Posts: 123
Location: redditch, united kingdom
|
| Posted: Wed Jun 14, 2017 9:14 am Post subject: Re: Barndoor Pedal Parts |
|
|
Yes that's what i'm after, pedal design is quite different between the two, so I'd be surprised if the springs and mounting positions are identical but I don't know for sure hence asking, none of the three RHD's between us have the proper springs so have had other things adapted to work.
_________________
1963 Squareback
1967 Porsche 912
RSVP VW |
|
| Back to top |
|
|
spit nolan
Samba Member
Joined: March 08, 2005
Posts: 123
Location: redditch, united kingdom
|
| Posted: Wed Jun 14, 2017 9:17 am Post subject: Re: Barndoor Pedal Parts |
|
|
If they are the same how much for a set posted to the UK? 
_________________
1963 Squareback
1967 Porsche 912
RSVP VW |
|
| Back to top |
|
|
|
