Author |
Message |
T-Bro Samba Member
Joined: November 22, 2023 Posts: 1 Location: Stockholm
|
Posted: Wed Nov 22, 2023 4:15 am Post subject: 30hp vs 34hp headers |
|
|
Hi.
I was wondering whether there is a difference between an aftermarket exhaust header on an earlier 30hp 1200 engine compared to the later 34hp? |
|
Back to top |
|
|
Bub Samba Member
Joined: June 10, 2004 Posts: 1151 Location: Central Washington
|
Posted: Wed Nov 22, 2023 3:54 pm Post subject: Re: 30hp vs 34hp headers |
|
|
If you're asking whether the header would fit both of those, yes, it should. Externally nothing changed that would make it fit one but not the other.
Assume that the 40hp exhausts do not fit . Though Some versions of the early exhaust from stale-air 1200cc engines/ 40hp are very very close but typically do not fit easily, but with a little work might. Especially if it's aftermarket.
but most all exhaust for the 1100/1200cc "36hp' engines are interchangeable. _________________
hitest wrote: |
Had a girlfriend once who shall we say, nearly arrived at the mere sight of a semaphore in action- easy to please she was... |
|
|
Back to top |
|
|
FritzCP Samba Member
Joined: October 23, 2005 Posts: 463 Location: Wisconsin
|
Posted: Thu Nov 23, 2023 4:08 pm Post subject: Re: 30hp vs 34hp headers |
|
|
the lower 1/3 pipes that meet up with the J tubes are different lengths in the factory heater box setups 36hp vs 40hp. if the aftermarket exhausts come with the J pipes, then they should fit the same on both being the same width 64mm stroke. _________________ Fritz Custom Products
Fritz 10 - Tin Screw Torquer
Fritz 124 - Crank Pulley Puller
Fritz 70 - 6306 Bearing Puller
Fritz 44 - Dizzy Puller |
|
Back to top |
|
|
|