Author |
Message |
frizzardking Samba Member
Joined: May 09, 2011 Posts: 575 Location: BUFFALO N.Y
|
Posted: Fri Oct 04, 2013 8:44 am Post subject: Manx soft Top Interior Frame |
|
|
Does anyone have some pictures of how the tube frame is on the Manx soft top. I have a nos top that came with side curtains with one of my buggies and it matches up to exactly to my Manx II , So I need to have the tube frame made.
Here are some pictures in a moment.
thanks Marc.
Not sure if if its a real Manx top were their several manufactures? I know some had rear side windows. It has the spike receptacle and you press it over; the side curtains zip on the top to the top ,and has snaps to the body on the inside.
So again the white top came with my emerald Manx and was never installed.
There are no snaps screwed into the green Manx , it just came with the top.
It even has the brown paper in between the windows.
So I saw the snaps on my yellow Manx and they Match up perfect even the inside snaps.
That's why I am wondering if this is a factory Manx top?
Last edited by frizzardking on Fri Oct 04, 2013 10:36 am; edited 1 time in total |
|
Back to top |
|
|
frizzardking Samba Member
Joined: May 09, 2011 Posts: 575 Location: BUFFALO N.Y
|
Posted: Fri Oct 04, 2013 9:16 am Post subject: Manx soft Top Interior Frame |
|
|
Here are Picture's of the Manx II and the soft top that lines up perfect ,If it's a real Manx top I don't know
Last edited by frizzardking on Fri Oct 04, 2013 9:23 am; edited 1 time in total |
|
Back to top |
|
|
frizzardking Samba Member
Joined: May 09, 2011 Posts: 575 Location: BUFFALO N.Y
|
Posted: Fri Oct 04, 2013 9:18 am Post subject: Manx soft Top Interior Frame |
|
|
Inside Snaps |
|
Back to top |
|
|
frizzardking Samba Member
Joined: May 09, 2011 Posts: 575 Location: BUFFALO N.Y
|
Posted: Fri Oct 04, 2013 9:22 am Post subject: Manx soft Top Interior Frame |
|
|
Top on without frame |
|
Back to top |
|
|
RedBaronofRedBud Samba Member
Joined: July 05, 2013 Posts: 505 Location: Southeast Missouri
|
Posted: Fri Oct 04, 2013 9:24 am Post subject: |
|
|
Here are a couple of pics of mine. The dimensions are as follows:
17.5x43x17.5 and 23.5x43x23.5
The 23 one goes to the rear and the 17 to the front. It adjusts for fit. The rear bow is inside a sleeve and there is a strap that keeps the bows from spreading too much.
LMK if you need more information _________________ Or you can call me………Tim
My two pennies…your mileage may vary
I’m not a complete idiot, there are parts missing |
|
Back to top |
|
|
kustoms Samba Member
Joined: November 20, 2003 Posts: 1313
|
Posted: Fri Oct 04, 2013 10:02 am Post subject: |
|
|
The Manx top would have had three windows in the rear. If I had the buggy here I could make a frame for you. _________________ Google this.
"Bread and Circuses"
And wondering what the heck happen to my Samba post count?!?
Tom Thompson
Tijuana Kustoms Inc. (TM)
1-516-338-8746
www.tjkustoms.com |
|
Back to top |
|
|
frizzardking Samba Member
Joined: May 09, 2011 Posts: 575 Location: BUFFALO N.Y
|
Posted: Fri Oct 04, 2013 10:12 am Post subject: Manx soft Top Interior Frame |
|
|
Thanks Guys ! Were there several manufactures that made variations of the top or did Manx tops always have a three rear window? |
|
Back to top |
|
|
frizzardking Samba Member
Joined: May 09, 2011 Posts: 575 Location: BUFFALO N.Y
|
Posted: Fri Oct 04, 2013 10:17 am Post subject: Manx soft Top Interior Frame |
|
|
Here is a picture of Vince's top from his buggy from last year and I thought he said it was the original top , it looks just like mine
Last edited by frizzardking on Fri Oct 04, 2013 10:18 am; edited 1 time in total |
|
Back to top |
|
|
RedBaronofRedBud Samba Member
Joined: July 05, 2013 Posts: 505 Location: Southeast Missouri
|
Posted: Fri Oct 04, 2013 10:18 am Post subject: |
|
|
Mine has the three windows, but I really dont know who all made them. This was the one that came with my buggy. Just had the bindings and snaps redone. The lady did a great job, IMHO. _________________ Or you can call me………Tim
My two pennies…your mileage may vary
I’m not a complete idiot, there are parts missing |
|
Back to top |
|
|
Mike1991 Samba Member
Joined: October 06, 2011 Posts: 95 Location: Arizona
|
Posted: Fri Oct 04, 2013 10:43 am Post subject: manx soft top |
|
|
This picture shows top bows for an original style top as seen in the original Manx catalog. This configuration hides bows when using this style 3 window top from being seen from the outside. Note straps between loops to keep the top tension tight so it does not flap at speed. The velcro strip around perimeter of body holds the top on without any snaps showing (not original).
Picture of original style top. No blind spots when driving. No snaps showing.
Picture from original Manx catalog. Price approx. $127.00 or so with side curtains, top bows, and all fasteners.
Last edited by Mike1991 on Fri Oct 04, 2013 11:07 am; edited 5 times in total |
|
Back to top |
|
|
kustoms Samba Member
Joined: November 20, 2003 Posts: 1313
|
Posted: Fri Oct 04, 2013 10:49 am Post subject: |
|
|
There was a few companies that made tops for buggies. The top in the Manx catalog is what I consider the original. _________________ Google this.
"Bread and Circuses"
And wondering what the heck happen to my Samba post count?!?
Tom Thompson
Tijuana Kustoms Inc. (TM)
1-516-338-8746
www.tjkustoms.com |
|
Back to top |
|
|
surfnc Samba Member
Joined: September 29, 2006 Posts: 948 Location: OBX, NC
|
Posted: Fri Oct 04, 2013 11:35 am Post subject: Re: Manx soft Top Interior Frame |
|
|
frizzardking wrote: |
Here is a picture of Vince's top from his buggy from last year and I thought he said it was the original top , it looks just like mine |
Marc
Mine was definitely not a Manx top. It was original to the build in 1968 but not from Meyers Manx. The bow system is just like this.
Yours uses a "lift the dot" fastener which I think is sturdier than the snap set up. You also have the holes for the bow bases in the body. You may want to contact the seller and see if they have the bows laying around.
Vince _________________ LOOKING FOR VINTAGE MEYERS MANX STUFF!!!
http://www.thesamba.com/vw/classifieds/detail.php?id=1105228 |
|
Back to top |
|
|
weasel_ugs Samba Member
Joined: March 16, 2012 Posts: 721 Location: Prescott Valley,Az.
|
Posted: Fri Oct 04, 2013 7:02 pm Post subject: |
|
|
The way the frame work is designed looks just like the frame on my Jeep YJ for use with the "family cage". I think I will have to see how close it is to fit my buggy because I really want a full top for it. |
|
Back to top |
|
|
frizzardking Samba Member
Joined: May 09, 2011 Posts: 575 Location: BUFFALO N.Y
|
Posted: Fri Oct 11, 2013 8:33 am Post subject: Manx soft Top Interior Frame |
|
|
Just had a boat canvas guy come and mock up the frame for the yellow Manx 2, with the aluminum frame, should be done when i get back from the Banx .
Thanks for the Pics and dimensions it really helped , going to have one made for the signature manx too.! |
|
Back to top |
|
|
RedBaronofRedBud Samba Member
Joined: July 05, 2013 Posts: 505 Location: Southeast Missouri
|
Posted: Fri Oct 11, 2013 9:14 am Post subject: |
|
|
My pleasure. If you need more dimensions or more pics, just LMK.
Have fun at MoTB! Safe travels! _________________ Or you can call me………Tim
My two pennies…your mileage may vary
I’m not a complete idiot, there are parts missing |
|
Back to top |
|
|
|