Author |
Message |
vacca_rabite Samba Member
Joined: July 04, 2021 Posts: 72 Location: PA
|
Posted: Sun Aug 08, 2021 11:25 am Post subject: how to remove the electric junction at the grounds? |
|
|
At the front of the bus under the dash, how on earth do I get this thing off? Pretty much the last thing I need to do before pulling the harness out so I can get primer on.
Thanks!
Zach |
|
Back to top |
|
|
SGKent Samba Member
Joined: October 30, 2007 Posts: 41031 Location: Citrus Heights CA (Near Sacramento)
|
Posted: Sun Aug 08, 2021 1:40 pm Post subject: Re: how to remove the electric junction at the grounds? |
|
|
can you get a small mirror to look at the other side. I am guessing there are a couple retaining fingers on the other side, and once one is popped out the other will come out easily. _________________ “Most people don’t know what they’re doing, and a lot of them are really good at it.” - George Carlin |
|
Back to top |
|
|
Starbucket Samba Member
Joined: April 30, 2007 Posts: 4025 Location: WA
|
Posted: Sun Aug 08, 2021 2:25 pm Post subject: Re: how to remove the electric junction at the grounds? |
|
|
If you google the number on it you will get a image and you can see how it mounts. |
|
Back to top |
|
|
busdaddy Samba Member
Joined: February 12, 2004 Posts: 51144 Location: Surrey B.C. Canada, but thinking of Ukraine
|
Posted: Sun Aug 08, 2021 3:23 pm Post subject: Re: how to remove the electric junction at the grounds? |
|
|
I seem to recall plastic tabs that have to be squeezed together stuck through a hole in the metal. _________________ Rust NEVER sleeps and stock never goes out of style.
Please don't PM technical questions, ask your problem in public so everyone can play along. If you think it's too stupid post it here
Stop dead photo links! Post your photos to The Samba Gallery!
Слава Україні! |
|
Back to top |
|
|
|