Author |
Message |
jcwelding Samba Member
Joined: July 14, 2016 Posts: 74 Location: LEICESTER, ENGLAND
|
Posted: Sat Jul 23, 2016 3:29 am Post subject: Re: 1953 arga kombi |
|
|
I had to drag the front clip out yesterday to get some measurements for another bus I'm building and thought while its out I would seal up the gunshot holes and repair the dash where the slug ripped through it!
|
|
Back to top |
|
|
Abscate Samba Member
Joined: October 05, 2014 Posts: 22670 Location: NYC/Upstate/ROW
|
Posted: Sat Jul 23, 2016 3:33 am Post subject: Re: 1953 arga kombi |
|
|
badassratbus wrote: |
here is my new project, thought i would share it with you
as you can see quite alot of work required |
The spacing on the frame rails is incorrect. Glad I can contribute.
_________________ .ssS! |
|
Back to top |
|
|
jcwelding Samba Member
Joined: July 14, 2016 Posts: 74 Location: LEICESTER, ENGLAND
|
|
Back to top |
|
|
jcwelding Samba Member
Joined: July 14, 2016 Posts: 74 Location: LEICESTER, ENGLAND
|
|
Back to top |
|
|
Scotty Samba Member
Joined: July 02, 2003 Posts: 1531 Location: Northampton - Uk
|
Posted: Mon Oct 24, 2016 5:13 am Post subject: Re: 1953 arga kombi |
|
|
Great work as usual dude! _________________
EverettB wrote: |
I'd be curious to know the length of his tip.
|
http://scottys-stuff.blogspot.com/ |
|
Back to top |
|
|
jcwelding Samba Member
Joined: July 14, 2016 Posts: 74 Location: LEICESTER, ENGLAND
|
Posted: Mon Oct 24, 2016 8:38 am Post subject: Re: 1953 arga kombi |
|
|
The original roof on the bus was completely shot so a donor roof was sourced by the previous owner but it was from a later split so needed to be modified to look like the barndoor style roof.
All that could be saved from the old roof was the small section with the crease in at the front so nice to put a bit of og metal back in even if its minimal.
I then sanded the paint back, greased the rusty areas and red oxide primed then painted it in a brown topcoat that I matched to part of the bus.
_________________ http://jcweldingservices.co.uk/
https://www.facebook.com/JcWeldingServices/
https://www.instagram.com/jcwelding/?hl=en |
|
Back to top |
|
|
jcwelding Samba Member
Joined: July 14, 2016 Posts: 74 Location: LEICESTER, ENGLAND
|
|
Back to top |
|
|
Bendango Samba Member
Joined: September 04, 2005 Posts: 593
|
Posted: Thu Oct 27, 2016 6:59 am Post subject: Re: 1953 arga kombi |
|
|
Fantastic nice to see this one hotting up! _________________ I want a real garage.
WANTED - [WTB] 55-62 Bus Thin Lip Package Tray SWR
Getting Used - SWR 60 westy copy built by vw ( apparently )
http://www.thesamba.com/vw/forum/viewtopic.php?t=320866
Braukuche wrote: |
Where did you find the elephant dick? |
|
|
Back to top |
|
|
Scotty Samba Member
Joined: July 02, 2003 Posts: 1531 Location: Northampton - Uk
|
Posted: Fri Oct 28, 2016 5:29 am Post subject: Re: 1953 arga kombi |
|
|
Flying along Jeff! _________________
EverettB wrote: |
I'd be curious to know the length of his tip.
|
http://scottys-stuff.blogspot.com/ |
|
Back to top |
|
|
jcwelding Samba Member
Joined: July 14, 2016 Posts: 74 Location: LEICESTER, ENGLAND
|
|
Back to top |
|
|
Lowdown Dirty Rat Samba Member
Joined: June 25, 2005 Posts: 878 Location: Cornwall, UK
|
Posted: Fri Oct 28, 2016 12:18 pm Post subject: Re: 1953 arga kombi |
|
|
Wow. Looks like you will be done in a week at this rate. Glad you can put a little slow time on mine to such great use _________________ 1951 Samba 20-017894
1952 Samba 20-028952 |
|
Back to top |
|
|
camit34 Samba Member
Joined: January 14, 2006 Posts: 1567 Location: Commerce City CO
|
Posted: Fri Oct 28, 2016 1:14 pm Post subject: Re: 1953 arga kombi |
|
|
WOW is right...!!!
Keep up the great work and keep the updates come'n! _________________ In search of a Vanagon
1971 Westy (SOLD)
1971 Deluxe (SOLD)
1967 Freedom Camper (SOLD) |
|
Back to top |
|
|
jcwelding Samba Member
Joined: July 14, 2016 Posts: 74 Location: LEICESTER, ENGLAND
|
Posted: Mon Oct 31, 2016 10:07 am Post subject: Re: 1953 arga kombi |
|
|
Lowdown Dirty Rat wrote: |
Wow. Looks like you will be done in a week at this rate. Glad you can put a little slow time on mine to such great use |
No rush for those parts at all Rob Although Hessisch will come round pretty sharpish so no blaming me
So with all the big chunks placed precariously onto the chassis I squared it all up and started fitting panels and welding where possible.
Front lowers.
Arches.
Cab floor.
Cargo floor.
There were loads of other little jobs in between all of this but I genuinely don't have time to photograph it all as every minute of spare time is going into the bus.
So this is one of the most recent pictures with it looking solid as a rock.
Next job is to get the old girl on the rotisserie and do all the little jobs which look endless when you get up close!! Oh and repair all the knackerd doors _________________ http://jcweldingservices.co.uk/
https://www.facebook.com/JcWeldingServices/
https://www.instagram.com/jcwelding/?hl=en |
|
Back to top |
|
|
wcfvw69 Samba Purist
Joined: June 10, 2004 Posts: 13389 Location: Arizona
|
Posted: Mon Oct 31, 2016 10:41 am Post subject: Re: 1953 arga kombi |
|
|
Simply amazing work here. I love seeing these dead buses brought back to life. What's the plan? A full media blast and repaint or a patina'd bus? _________________ Contact me at [email protected]
Follow me on instagram @sparxwerksllc
Decades of VW and VW parts restoration experience.
The Samba member since 2004.
**Now rebuilding throttle bodies for VW's and Porsche's**
**Restored German Bosch distributors for sale or I can restore yours**
**Restored German Pierburg fuel pumps for sale or I can restore yours**
**Restored Porsche fuel pumps or I can restore yours**
**Restored Porsche distributors or I can restore yours** |
|
Back to top |
|
|
jcwelding Samba Member
Joined: July 14, 2016 Posts: 74 Location: LEICESTER, ENGLAND
|
Posted: Mon Oct 31, 2016 10:57 am Post subject: Re: 1953 arga kombi |
|
|
wcfvw69 wrote: |
Simply amazing work here. I love seeing these dead buses brought back to life. What's the plan? A full media blast and repaint or a patina'd bus? |
Thanks! All the exterior will be left as it is apart from the bullet holes as nobody wants a leaky bus The underside will be detailed and the inside painted and clean apart from the cab area as it looks pretty cool as it is. _________________ http://jcweldingservices.co.uk/
https://www.facebook.com/JcWeldingServices/
https://www.instagram.com/jcwelding/?hl=en |
|
Back to top |
|
|
wcfvw69 Samba Purist
Joined: June 10, 2004 Posts: 13389 Location: Arizona
|
Posted: Mon Oct 31, 2016 1:43 pm Post subject: Re: 1953 arga kombi |
|
|
jcwelding wrote: |
wcfvw69 wrote: |
Simply amazing work here. I love seeing these dead buses brought back to life. What's the plan? A full media blast and repaint or a patina'd bus? |
Thanks! All the exterior will be left as it is apart from the bullet holes as nobody wants a leaky bus The underside will be detailed and the inside painted and clean apart from the cab area as it looks pretty cool as it is. |
Gotcha. What do you use to stop the surface rust from continuing to eat into the metal on the exterior? _________________ Contact me at [email protected]
Follow me on instagram @sparxwerksllc
Decades of VW and VW parts restoration experience.
The Samba member since 2004.
**Now rebuilding throttle bodies for VW's and Porsche's**
**Restored German Bosch distributors for sale or I can restore yours**
**Restored German Pierburg fuel pumps for sale or I can restore yours**
**Restored Porsche fuel pumps or I can restore yours**
**Restored Porsche distributors or I can restore yours** |
|
Back to top |
|
|
chrisflstf Samba Member
Joined: February 10, 2004 Posts: 3446 Location: San Diego
|
Posted: Mon Oct 31, 2016 6:13 pm Post subject: Re: 1953 arga kombi |
|
|
Your metal working skill are absolutely astounding. Thanks for the pics |
|
Back to top |
|
|
EmpiGT Samba Member
Joined: January 27, 2005 Posts: 2597
|
Posted: Mon Oct 31, 2016 8:29 pm Post subject: Re: 1953 arga kombi |
|
|
What's up with the two barny deluxes? one looks like a deep skylight bus. Great work |
|
Back to top |
|
|
lo-lo55 Samba Member
Joined: April 08, 2004 Posts: 61 Location: christchurch New Zealand
|
Posted: Tue Nov 01, 2016 12:51 am Post subject: Re: 1953 arga kombi |
|
|
Amazing work and speed! 52 deluxe belongs to Lowdown Dirty Rat posting above. Has a thread on SSVC. Pretty inspiring insta feed from JC too, serious skills. |
|
Back to top |
|
|
andre b Samba Member
Joined: August 10, 2004 Posts: 806 Location: San Jose C.A.
|
Posted: Tue Nov 01, 2016 6:37 am Post subject: Re: 1953 arga kombi |
|
|
Amazing what craftsmanship is being but into these barndoors,,the work has progressed so much from just a couple years!!
keep the pics flowing. |
|
Back to top |
|
|
|