Author |
Message |
kiwighia68 Samba Member
Joined: October 20, 2013 Posts: 2878 Location: Auckland, New Zealand
|
Posted: Tue Sep 09, 2014 11:16 am Post subject: Thin aircleaner to fit on top of solex carb |
|
|
I'm trying to tidy my engine bay without making big changes (dual carbs, etc) to the engine. I'm going to move the battery to under the back seat and I'm thinking of replacing the oil bath air cleaner with a flat dry aircleaner. The flat aircleaner has to go on top of my standard Solex carb.
My questions: Is this do-able? If so, which aircleaner would fit? My car is a '68 coupe without the inbuilt rain-drain in the rear decklid (not the thicker one that is standard on later models).
(I'm going for a clean look engine bay and will (temporarily) remove the battery hold-down clamp and the air cleaner stand.)
Thanks. _________________ Festina lente - hasten slowly
1968 Ghia named Emiko
Resto completed Dec 2015 |
|
Back to top |
|
|
Bloku Expert Noob
Joined: April 09, 2013 Posts: 559 Location: Tulsa/Jenks Oklahoma
|
Posted: Tue Sep 09, 2014 12:15 pm Post subject: |
|
|
My ghia has a flat air cleaner on top of the carb. It fits fin, but I have no rain catch.
Hope it helps. _________________ 1971 Karmann Ghia
1975 Porsche 914
-----
1975 BMW 2002
1976 BMW 2002 (Bored and Stroked w/ 5-Speed)
1981 BMW E21
1986 Toyota 4Runner (Dead engine and trans)
1989 Toyota 4x4 PU
1994 BMW E36 (Daily) |
|
Back to top |
|
|
CiderGuy Samba Member
Joined: December 23, 2013 Posts: 1351 Location: Bucks County, Pa
|
Posted: Tue Sep 09, 2014 1:25 pm Post subject: |
|
|
On my Ghia, the oil breather hose connects to the oil bath air cleaner. Have you given an idea as to how you plan on venting your engine case? |
|
Back to top |
|
|
kiwighia68 Samba Member
Joined: October 20, 2013 Posts: 2878 Location: Auckland, New Zealand
|
Posted: Tue Sep 09, 2014 2:08 pm Post subject: |
|
|
CiderGuy wrote: |
On my Ghia, the oil breather hose connects to the oil bath air cleaner. Have you given an idea as to how you plan on venting your engine case? |
Okay, you' ve got me there. So it's more complicated than I thought. Any solution? Thanks for responding. I might have made a fool (or a bigger one than I already am) of myself there. _________________ Festina lente - hasten slowly
1968 Ghia named Emiko
Resto completed Dec 2015
Last edited by kiwighia68 on Fri Sep 12, 2014 11:47 am; edited 1 time in total |
|
Back to top |
|
|
CiderGuy Samba Member
Joined: December 23, 2013 Posts: 1351 Location: Bucks County, Pa
|
Posted: Tue Sep 09, 2014 3:23 pm Post subject: |
|
|
kiwighia68 wrote: |
CiderGuy wrote: |
On my Ghia, the oil breather hose connects to the oil bath air cleaner. Have you given an idea as to how you plan on venting your engine case? |
Okay, you' e got me there. So it's more complicated than I thought. Any solution? Thanks for responding. I might have made a fool (or a bigger one than I already am) of myself there. |
,
I think they did different things for different years, or even the markets they were selling in. Just check how its done on your car now. |
|
Back to top |
|
|
sactojesse Samba Member
Joined: November 21, 2006 Posts: 2655 Location: Sacramento, California, USA
|
Posted: Tue Sep 09, 2014 3:42 pm Post subject: |
|
|
CiderGuy wrote: |
On my Ghia, the oil breather hose connects to the oil bath air cleaner. Have you given an idea as to how you plan on venting your engine case? |
Most aftermarket air cleaners for stock Solex carbs have a provision for the crankcase breather hose. See this one for example:
http://www2.cip1.com/ProductDetails.asp?ProductCode=C13-9076 _________________ 1966 Karmann-Ghia convertible |
|
Back to top |
|
|
carl4x4 Samba Member
Joined: March 20, 2012 Posts: 679 Location: United Kingdom
|
|
Back to top |
|
|
aero3113 Samba Member
Joined: March 03, 2013 Posts: 196 Location: Setauket, NY (Long Island)
|
Posted: Tue Sep 09, 2014 4:10 pm Post subject: |
|
|
When I first bought my Ghia it had a K&N filter on it. It didn't run as smooth as I thought it should so I hooked the original oil bath filter back up. Once the oil bath was back in it ran great! (The plastic fuel filter has since been relocated)
|
|
Back to top |
|
|
Woreign Samba Member
Joined: June 04, 2006 Posts: 2841 Location: Crestview FL
|
Posted: Tue Sep 09, 2014 5:40 pm Post subject: |
|
|
Here's how I hooked up the breather hose on my engine:
|
|
Back to top |
|
|
kiwighia68 Samba Member
Joined: October 20, 2013 Posts: 2878 Location: Auckland, New Zealand
|
Posted: Wed Sep 10, 2014 1:39 am Post subject: |
|
|
Thanks guys, Woreign has shown me how to do it. Thanks for the other contributions.
I think this thread is now closed. _________________ Festina lente - hasten slowly
1968 Ghia named Emiko
Resto completed Dec 2015 |
|
Back to top |
|
|
vwsb74 Samba Member
Joined: July 30, 2009 Posts: 1201 Location: socal
|
Posted: Thu Oct 29, 2015 10:19 pm Post subject: |
|
|
Woreign wrote: |
Here's how I hooked up the breather hose on my engine:
|
You still have rain catcher? _________________ 74 super beetle
2011 ford explorer traded
2010 mazda 3 hatchback
2014 Honda odyssey
2180cc 48IDA clone
Xr310 cam =171hp@6k rpm sold so as the car😢 |
|
Back to top |
|
|
|