Author |
Message |
gitchesum Samba Member
Joined: November 10, 2003 Posts: 513 Location: North Cali
|
Posted: Wed Sep 10, 2014 8:13 am Post subject: steering column horn wire. |
|
|
I have the wire showing at both ends...I would like to replace it. It seems to be stuck in the column...do I just pull it out and run another wire down the tube ? Or ???
Never mind. Pulled out of tube with a bit of force. _________________ Looking for SP Kadron manifolds...please !!
57 SC
61 rag w/356B brakes
61 356B
Honda XLR 250, 69 Z50, Yamaha 100 Enduro...and others.
GMC SLT 4x4 Dmax
Kubota L3710, not enuf attachments.
And various VW's that come and go...
Last edited by gitchesum on Wed Sep 10, 2014 11:24 pm; edited 1 time in total |
|
Back to top |
|
|
grandpa pete Samba Member
Joined: July 06, 2008 Posts: 6426 Location: St. Petersburg, FL
|
Posted: Wed Sep 10, 2014 2:41 pm Post subject: |
|
|
That was a loose wire in my 66 . I replaced the entire harness last month ( see build thread below ) . There is a cover casing on the lower 6 inches . Mine was stuck in the lower slot . It pulled out eventually .
See the yellow casing at the base of column _________________ 63 two fold rag
66 sedan delivery Type 6
http://www.thesamba.com/vw/forum/viewtopic.php?t=569619&highlight=sedan+delivery |
|
Back to top |
|
|
gitchesum Samba Member
Joined: November 10, 2003 Posts: 513 Location: North Cali
|
Posted: Wed Sep 10, 2014 4:42 pm Post subject: |
|
|
Nice job on the dual MC...can you describe your setup ? _________________ Looking for SP Kadron manifolds...please !!
57 SC
61 rag w/356B brakes
61 356B
Honda XLR 250, 69 Z50, Yamaha 100 Enduro...and others.
GMC SLT 4x4 Dmax
Kubota L3710, not enuf attachments.
And various VW's that come and go... |
|
Back to top |
|
|
grandpa pete Samba Member
Joined: July 06, 2008 Posts: 6426 Location: St. Petersburg, FL
|
|
Back to top |
|
|
|