oil pressure switch wire gauge

George Stimson · Posted: Sat Oct 04, 2014 8:48 am Post subject:

Thanks!

ashman40 · Posted: Fri Oct 03, 2014 7:51 pm Post subject:

The wiring diagram indicate the wire is 0.5mm^2. That converts to 20AWG.
This wire only needs to provide ground for a 2W bulb.
_________________
AshMan40
---------------------------
'67 Beetle #1 {project car that never made it to the road Sad

}
'75 Beetle 1200LS (RHD Japan model) {junked due to frame rot}
'67 Beetle #2 {2019 project car - Wish me luck!}

Cusser · Posted: Fri Oct 03, 2014 6:44 pm Post subject:

Multi69s · Posted: Fri Oct 03, 2014 11:00 am Post subject:

20 AWG, way to small, probably closer to 16. When I rewire, I usually just get 14, and go with it.
_________________
69 road Bug 2110
73 Squareback - 2L, T4, Automatic W/ AC
Gone, but many fond memories 69 Baja Bug 2010 - 5 Rib Bus Transaxle
Gone but not forgotten 72 Baja Bug 2010
My builds
T4 into Squareback http://www.thesamba.com/vw/forum/viewtopic.php?t=458944&highlight=
Auto Trans Rebuild http://www.thesamba.com/vw/forum/viewtopic.php?t=516066&highlight=
AC in Squareback https://www.thesamba.com/vw/forum/viewtopic.php?t=...highlight=

jhoefer · Samba Member Joined: May 19, 2011 Posts: 987

Closest is 20 AWG.

George Stimson · Posted: Fri Oct 03, 2014 8:47 am Post subject: oil pressure switch wire gauge

Quick question: what's the gauge of the wire coming off the oil pressure indicator switch?


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

Forum Index -> Beetle - Late Model/Super - 1968-up		Share:
		Print View

	Forum Index -> Beetle - Late Model/Super - 1968-up	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1