Viewing feedback for: mcdragracer Email: [email protected] Last Visited: Yesterday |
Author |
Message |
txoval Samba Member
Joined: January 23, 2004 Posts: 3553 Location: The Woodlands, TX
|
Posted: Fri Mar 13, 2020 5:06 pm Post subject: Re: mcdragracer - [email protected] |
|
|
Rick recently rebuilt my dual 40 Dellortos. He stayed in constant contact while completing the work and is a master of this craft. He answered all of my questions and provided jetting advice regarding my engine combo.
Below are pictures of my completed carbs...they speak for themselves. Once on the engine I’ll report back on how well they work
|
|
Back to top |
|
|
pizza941 Samba Member
Joined: January 15, 2004 Posts: 8
|
Posted: Mon Mar 16, 2020 7:03 pm Post subject: Re: mcdragracer - [email protected] |
|
|
Great source for Dellorto parts and expert on Dellorto carbs.
Thx, Bob |
|
Back to top |
|
|
umpy907 Samba Member
Joined: February 29, 2008 Posts: 4 Location: rainier wa.
|
Posted: Mon Mar 30, 2020 1:35 pm Post subject: Re: mcdragracer - [email protected] |
|
|
Thanks again for the parts I needed and for answering all my questions and getting my parts shipped out quickly. Will definitely be using your services again |
|
Back to top |
|
|
tinman Samba Member
Joined: September 14, 2003 Posts: 42
|
Posted: Wed Apr 01, 2020 7:17 pm Post subject: Re: mcdragracer - [email protected] |
|
|
I recently had Rick rebuild some 36mm dellortos ,, He kept in constant
contact with me through the rebuild process and answered all questions related to them . i highly recommend him and his profesional abilities
I wouldnt hesitate to do business with him again . the carbs look brand new
and perform perfectly,,, couldnt ask for more! |
|
Back to top |
|
|
umpy907 Samba Member
Joined: February 29, 2008 Posts: 4 Location: rainier wa.
|
Posted: Fri Apr 10, 2020 7:29 pm Post subject: Re: mcdragracer - [email protected] |
|
|
Bought a couple parts and was very fast to ship. Was super easy to deal with and when I had some questions he took the to help me out and walk me through everything.
Will definitely be buying all my Dellorto parts right here 😁👍
Thanks again for all your help it means a lot to find a good honest does what he says person to deal with. |
|
Back to top |
|
|
vince1 Samba Member
Joined: December 14, 2003 Posts: 823 Location: Burgundy, France
|
|
Back to top |
|
|
Matthew Tylka Samba Member
Joined: April 12, 2004 Posts: 36
|
Posted: Tue May 05, 2020 7:33 am Post subject: Re: mcdragracer - [email protected] |
|
|
Rick rebuilt a set of 40mm Dellortos for me. He kept me updated the entire process and the turn around was very good...quicker than expected. The carbs ran great on first startup and they turned out great. I would recommend to anybody and will plan on doing business with him again. Thank you Rick for quality work. |
|
Back to top |
|
|
fredsdually Samba Member
Joined: August 08, 2016 Posts: 1 Location: Iowa
|
Posted: Thu May 07, 2020 8:25 am Post subject: Re: mcdragracer - [email protected] |
|
|
Rebuilt my 48 dellortos and did an excellent job!!!! He rejetted and installed a set of new vents and soda blasted them so they look new and when I put them on my 2165 they ran awesome straight away !! He was in constant contact and I WOULD RECOMMEND HIM HIGHLY....Car has more power and drivability than ever and I cant wait for my local 1/8 mile track to re-open |
|
Back to top |
|
|
[email protected] Samba Member
Joined: June 21, 2003 Posts: 218 Location: glendale, az
|
Posted: Wed May 27, 2020 9:21 pm Post subject: Re: mcdragracer - [email protected] |
|
|
I had Rick do 44 idf for me recently...one that had been frozen up from water sitting in it. after talking to him briefly, i was sure he was the guy i needed to send it to. Once he got it he let me know, and once again called me once it was torn down and estimated. I gave him some engine info, and he got me a nice baseline set up on jetting. The pictures he sent were amazing, and the carb looked like new. It looked even better in person once i got it back. It truly looks brand new! i am so stoked, and will be getting it on my buddys car soon. i would recommend that anyone needing carb service to get ahold of Rick and talk to him, once you do, you will understand. He is also very fair priced, and get it done in a timely manner. i will be sending more to him in the future.
KC _________________ if it jams, force it. if it breaks, it needed replacing anyways.... |
|
Back to top |
|
|
fraho Samba Member
Joined: February 19, 2006 Posts: 3
|
Posted: Tue Jun 30, 2020 10:39 pm Post subject: Re: mcdragracer - [email protected] |
|
|
Im Very Impressed with Rick 1st experience to the top Customer Service, very Humble, Quality,Person, Equal treatment on who ever you are. Whats fading away this days. I had CALLED SOMEONE ELSE in the site, he acted like he was the only one on earth doing it, maybe was a robot.
2nd. Good work on the 40s carbs, they woke up my motor, what a difference, Rick asked my motor specifications for adjustments and parts on my carbs, very happy with his work that I sent him another pair 44s. Did not need to buy reproduction carbs. Rick told me call me if you need help adjusting the carbs and, I did he walked me through it, very patiently. Guy is very knowledgeable, but does not show it or acted. Highly recommend him. Thanks again. |
|
Back to top |
|
|
Emeraldlion Samba Member
Joined: April 13, 2005 Posts: 743 Location: Texarkana, TX
|
Posted: Mon Jul 27, 2020 12:38 pm Post subject: Re: mcdragracer - [email protected] |
|
|
Just completed a transaction with Rick and received my 45 dellortos today. After another samba transaction gone sour in which my carbs, rebuild kits, and parts were stolen, Rick reached out to offer some help. I should have gone with Rick to begin with.
Rick kept me updated with photos, very reasonable rates, detailed receipt, basic tuning for my setup and I could not have asked for an easier process. Thank you Rick for restoring some confidence and providing a great rebuild service! _________________ 1967 Sunroof Beetle: tourist pass car
1961 SWR Kombi |
|
Back to top |
|
|
Mark Awdykowyz Samba Member
Joined: January 08, 2005 Posts: 4 Location: Pflugerville,Texas 78660
|
Posted: Fri Nov 13, 2020 7:47 am Post subject: Re: mcdragracer - [email protected] |
|
|
I bought a set of rebuilt 40mm Dellortos nearly four years ago and they never ran right. So after spending hundreds of dollars trying to have them adjusted over the last three years, I took them off and replaced them with brand new 44mm Webers--smooth operation and more top end power than the Dellortos, but a 20% decrease in fuel economy. So I sent Rick my 40mm Dellortos. Rick rebuilt my 40mm Dellortos and they perform like the new ones I had in 1998. The engine fired right up, the idle was adjusted and the carbs were synchronized. It's such a pleasure to drive the car--finally! There were zero issues and zero surprises. If you want the carburetors to perform and look brand new, have it done right the first time and hire Rick. Remember the old adage, "you get what you pay for." I promise you that choosing Rick to rebuild your Dellortos will be a decision that you will look back and smile from ear-to-ear. Why second guess such a critical component to your ride? Hire the best and contact Rick Hunt. |
|
Back to top |
|
|
Dan Ruddock Samba Member
Joined: October 25, 2012 Posts: 3594 Location: Sarasota, in my adopted state of Florida
|
Posted: Mon Jan 04, 2021 10:54 am Post subject: Re: mcdragracer - [email protected] |
|
|
Rick made me some prototype DCNF venturi's as they are NLA. Perfect, could not be happier. Dan |
|
Back to top |
|
|
truckersmike Elder Sambanite
Joined: March 16, 2001 Posts: 2025 Location: Bellingham, WA
|
Posted: Tue Jan 26, 2021 7:21 pm Post subject: Re: mcdragracer - [email protected] |
|
|
While getting help on jetting a set of 40 IDF"s in the forums, I mentioned that one of the accelerator pump rods had busted. Rick chimed in and said he might have one. Sure enough, got a PM from him with the part that I needed. I then asked if he had any F7 emulsion tubes and he had those as well.
Great prices, great communication and today they arrived nicely packaged.
Couldn't be happier Rick! _________________ 59 DD panel. Former Romano's TV delivery bus
67 Westy SO-42 pop-t |
|
Back to top |
|
|
67 Sunroof Samba Member
Joined: February 22, 2014 Posts: 1836 Location: Salisbury, MD
|
Posted: Mon Feb 22, 2021 9:12 pm Post subject: Re: mcdragracer - [email protected] |
|
|
Rick has been a pleasure to deal with. Constant contact and super friendly. I will certainly consider him in the future if I need ANY carb work!!!
Extremely pleased. _________________ 1776cc, CB crank, CB 2241 cam, CB light lifters, CB H-beam rods, CB light flywheel, Mahle forged pistons, A1 Sidewinder exhaust, Dellorto drla 40’s, Hoover modded case, fully balanced, fully flowed, heads by www.type-emotorsports.com, Air ride suspension by https://www.airkewld.com/?Click=3989 |
|
Back to top |
|
|
RailBoy Samba Member
Joined: March 10, 2008 Posts: 2904 Location: Virginia
|
Posted: Wed Apr 07, 2021 10:49 am Post subject: Re: mcdragracer - [email protected] |
|
|
Hello All Carb Fans, I am Dell DLRA Bias and Rick is the man to deal with for Dells for sure. He has helped me out a few times now on locating parts and testing parts, why I had to recently send him a carb.. Worn out parts simply getting in my way of a fine running machine that developed. But Rick had the Arensonal to Check thing with and plus the knowlodge, and so be it, he communicated with me on ever step and solved the issue. Plus had the parts new and used that are all Dell Items... Thanks Rick for work and getting it done fast even in today's world of the Covid-19.. RB
_________________ [quote="smitty24"]"HELP, I ported my own heads and now have fire coming out my ass" .[/quote]
|
|
Back to top |
|
|
74 Thing Samba Member
Joined: September 02, 2004 Posts: 7389
|
Posted: Wed Apr 07, 2021 11:38 am Post subject: Re: mcdragracer - [email protected] |
|
|
Rick does damn good work and keeps you updated which makes me feel like a valued customer.
I had him make me some venturis that were then sent to Berg and grooved for my DRLAs.
|
|
Back to top |
|
|
tenles Samba Member
Joined: January 22, 2019 Posts: 1 Location: Fremantle
|
Posted: Wed May 05, 2021 10:11 pm Post subject: Re: mcdragracer - [email protected] |
|
|
Excellent communication and fantastic work done on my 40 Dells. Stripped, blasted, cleaned, rebuilt. Excellent job! they make the rest of the car look pretty ordinary........
Thanks very much Rick. |
|
Back to top |
|
|
[email protected] Samba Member
Joined: June 21, 2003 Posts: 218 Location: glendale, az
|
Posted: Sun May 23, 2021 10:36 pm Post subject: Re: mcdragracer - [email protected] |
|
|
Just had Rick do a second carb for me. I cant wait to get that one installed once that engine is built. I am sure it will be as good as the last one, which fired right up and idled immediately...a nice change from before. Another nice change is superb communication and service. Thanks again Rick! I am sure i will send more your way! _________________ if it jams, force it. if it breaks, it needed replacing anyways.... |
|
Back to top |
|
|
evanfrucht Samba Member
Joined: July 24, 2016 Posts: 2180 Location: Laurel Canyon, CA
|
Posted: Sun May 30, 2021 10:29 am Post subject: Re: mcdragracer - [email protected] |
|
|
I found a used set of Dellorto 45's and, eager to get my hands dirty and learn something new, wanted to embark on the rebuild myself.
I spent some time studying diagrams and reading, which provided me a basic understanding of the design and parts involved, but I was also left with many questions and uncertainties. I did not know exactly where to begin or what to look for but knew I needed some parts, some of which an internet search proved hard to obtain. This is when I came in contact with Rick after reading multiple reccomendations and posts on the forum holding Rick and his work in high regard.
I contacted Rick and immediately could tell he was extremely knowledgeable and experienced. On top of that he is just a cool friendly dude who wants to help make you happy. Not to mention he is a Dellorto parts magician, he can somehow make rare hard to find parts somehow just appear out of no where, and for the best price one could ask for.
He quickly shipped the rebuild parts and I got started. I ran into some issues along the way and called Rick who took the time to answer my questions in detail. What I learned along the way is priceless, the knowledge will help me keep the carbs running well for many years and miles to come. The service and support you get with Rick is unbeatable.
Once finished rebuilding them I couldn't get them to run right. The symptoms didn't seem to make sense either. After getting nowhere but frustrated for the next week I decided to bring them to Rick to look at and he was able to quickly identify the problem. He even found/fixed some other minor yet very important details I had missed.
My engine would not be running as good as it now without Rick... just call him already! _________________ 1967 Bug ( the daily rod )
1964 Fury Wagon ( the pavement shredder ) |
|
Back to top |
|
|
|