Author |
Message |
fivelugshortaxle Samba Member
![](/vw/forum/images/avatars/206127551259e0368bdb13c.jpg)
Joined: May 13, 2011 Posts: 4254 Location: Aumsville, Oregon
|
Posted: Mon Jun 01, 2015 4:00 am Post subject: My 1968 Beetle....being brought back to life! |
|
|
_________________ Good things come to those who wait.
2332 with lots of goodies....
Rotating assembly balanced by Brothers VW
4340 84mm crank
AA 94mm p&c' s
Total seal 2nd ring, rest are Grants
5.5 h beams
Magnum straight cuts
Steve Long XR310 on a 106
CB 1.4 rockers
CB Magnaspark 2 distributor
NGK D7ea plugs
A1 lowdown 1 3/4 with single muffler
Dellorto 48's with 40 venturies
Kennedy Stage 2 with Daiken disc |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
M_atthewanderson Samba Member
![](/vw/forum/images/avatars/2229508835f1a6a6571c7a.jpg)
Joined: January 25, 2005 Posts: 288 Location: Seattle
|
Posted: Wed Jun 03, 2015 10:34 pm Post subject: |
|
|
Great color. What are your plans? Engine, wheels interior? _________________ 1980 2.0 Sunroof Vanagon |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
fivelugshortaxle Samba Member
![](/vw/forum/images/avatars/206127551259e0368bdb13c.jpg)
Joined: May 13, 2011 Posts: 4254 Location: Aumsville, Oregon
|
Posted: Thu Jun 04, 2015 11:18 pm Post subject: |
|
|
mattography wrote: |
Great color. What are your plans? Engine, wheels interior? |
All black interior with scat procar low back seats. I've got an original empi gtv steering wheel.
and here's the wheels. Motor isn't in yet and I've got dropped spindles and a beam. Was messing around and dropped the beam almost all the way down to see how low it would go. Too low like that, just wanted to see.
Motor is 2276 with Steve Long XR310 cam. Waiting on tin to get done powder coating. Breather tower has since been sent out to get tapped for AN fittings. One breather to fuel pump block off and one line to the passenger side valve cover. Original german cylinder tins...aftermarket doghouse shroud that has been internally modified and had a venture ring added. _________________ Good things come to those who wait.
2332 with lots of goodies....
Rotating assembly balanced by Brothers VW
4340 84mm crank
AA 94mm p&c' s
Total seal 2nd ring, rest are Grants
5.5 h beams
Magnum straight cuts
Steve Long XR310 on a 106
CB 1.4 rockers
CB Magnaspark 2 distributor
NGK D7ea plugs
A1 lowdown 1 3/4 with single muffler
Dellorto 48's with 40 venturies
Kennedy Stage 2 with Daiken disc |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
M_atthewanderson Samba Member
![](/vw/forum/images/avatars/2229508835f1a6a6571c7a.jpg)
Joined: January 25, 2005 Posts: 288 Location: Seattle
|
Posted: Fri Jun 05, 2015 11:16 pm Post subject: |
|
|
Are you going to have a rake stance? Super clean engine, looks great. This is one of the cleanest >67 builds i've seen lately. Are you keeping low chrome? _________________ 1980 2.0 Sunroof Vanagon |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
fivelugshortaxle Samba Member
![](/vw/forum/images/avatars/206127551259e0368bdb13c.jpg)
Joined: May 13, 2011 Posts: 4254 Location: Aumsville, Oregon
|
Posted: Fri Jun 05, 2015 11:21 pm Post subject: |
|
|
mattography wrote: |
Are you going to have a rake stance? Super clean engine, looks great. This is one of the cleanest >67 builds i've seen lately. Are you keeping low chrome? |
Yeah, I'm keeping a nose down rake stance....just not quite this low. I kept all the body trim and I've got German running boards with the chrome strip on them. Other than that, no chrome. All business. The engine tin is getting powdercoated a black hammer finish right now. Breather tower is getting drilled and tapped for AN 8 fittings. It will have a line going to a stainless off road breather element that will be mounted high and to the right on the firewall. away from the shroud.
Thanks for the compliment....I'm going for a plain, clean look. Classic. _________________ Good things come to those who wait.
2332 with lots of goodies....
Rotating assembly balanced by Brothers VW
4340 84mm crank
AA 94mm p&c' s
Total seal 2nd ring, rest are Grants
5.5 h beams
Magnum straight cuts
Steve Long XR310 on a 106
CB 1.4 rockers
CB Magnaspark 2 distributor
NGK D7ea plugs
A1 lowdown 1 3/4 with single muffler
Dellorto 48's with 40 venturies
Kennedy Stage 2 with Daiken disc |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
lawn ninja Samba Member
![](/vw/forum/images/avatars/13300838314e99f130de032.png)
Joined: January 02, 2006 Posts: 1009 Location: Round Rock, TX
|
Posted: Sun Jun 07, 2015 6:51 pm Post subject: |
|
|
There is no such thing as too low, unless it can't move, then its too low. Nice looking fat chick. ![Exclamation](images/smiles/icon_exclaim.gif) _________________ Jason
My 64 1500 S Notchback project here
My 58 sedan project here
My 63 Ghia here |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
fivelugshortaxle Samba Member
![](/vw/forum/images/avatars/206127551259e0368bdb13c.jpg)
Joined: May 13, 2011 Posts: 4254 Location: Aumsville, Oregon
|
Posted: Sun Jun 07, 2015 7:28 pm Post subject: |
|
|
lawn ninja wrote: |
There is no such thing as too low, unless it can't move, then its too low. Nice looking fat chick. ![Exclamation](images/smiles/icon_exclaim.gif) |
Thanks, but its not a fat chick, It's a 68 _________________ Good things come to those who wait.
2332 with lots of goodies....
Rotating assembly balanced by Brothers VW
4340 84mm crank
AA 94mm p&c' s
Total seal 2nd ring, rest are Grants
5.5 h beams
Magnum straight cuts
Steve Long XR310 on a 106
CB 1.4 rockers
CB Magnaspark 2 distributor
NGK D7ea plugs
A1 lowdown 1 3/4 with single muffler
Dellorto 48's with 40 venturies
Kennedy Stage 2 with Daiken disc |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
lawn ninja Samba Member
![](/vw/forum/images/avatars/13300838314e99f130de032.png)
Joined: January 02, 2006 Posts: 1009 Location: Round Rock, TX
|
Posted: Mon Jun 08, 2015 10:28 pm Post subject: |
|
|
Ummm... Yes it is. _________________ Jason
My 64 1500 S Notchback project here
My 58 sedan project here
My 63 Ghia here |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
M_atthewanderson Samba Member
![](/vw/forum/images/avatars/2229508835f1a6a6571c7a.jpg)
Joined: January 25, 2005 Posts: 288 Location: Seattle
|
Posted: Tue Jun 09, 2015 12:32 pm Post subject: |
|
|
I call >67 fat chicks, but i know some people its >72 for beetles. I think theres a locked thread on this discussion somewhere. All i know is the more im in reader rides lately the more i need a late beetle.
Are you going to keep the wing windows or going cal? _________________ 1980 2.0 Sunroof Vanagon |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
fivelugshortaxle Samba Member
![](/vw/forum/images/avatars/206127551259e0368bdb13c.jpg)
Joined: May 13, 2011 Posts: 4254 Location: Aumsville, Oregon
|
Posted: Tue Jun 09, 2015 8:59 pm Post subject: |
|
|
Fat chicks are the beetles with the big ass round tail lights _________________ Good things come to those who wait.
2332 with lots of goodies....
Rotating assembly balanced by Brothers VW
4340 84mm crank
AA 94mm p&c' s
Total seal 2nd ring, rest are Grants
5.5 h beams
Magnum straight cuts
Steve Long XR310 on a 106
CB 1.4 rockers
CB Magnaspark 2 distributor
NGK D7ea plugs
A1 lowdown 1 3/4 with single muffler
Dellorto 48's with 40 venturies
Kennedy Stage 2 with Daiken disc |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
56Cabrio Samba Member
![](/vw/forum/images/avatars/161925632862881c30aad30.jpg)
Joined: May 22, 2008 Posts: 1899 Location: San Fernando Valley, CA
|
Posted: Tue Jun 09, 2015 10:42 pm Post subject: |
|
|
fivelugshortaxle wrote: |
Fat chicks are the beetles with the big ass round tail lights |
I thought it was because of the big ass windows and stubby looking deck lids ? (Rear end ) |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
lawn ninja Samba Member
![](/vw/forum/images/avatars/13300838314e99f130de032.png)
Joined: January 02, 2006 Posts: 1009 Location: Round Rock, TX
|
Posted: Wed Jun 10, 2015 11:31 am Post subject: |
|
|
56Cabrio wrote: |
fivelugshortaxle wrote: |
Fat chicks are the beetles with the big ass round tail lights |
I thought it was because of the big ass windows and stubby looking deck lids ? (Rear end ) |
It is because of the big windows, short hood, stubby engine lid and a number of other things. But that is the reason they are called fat chicks, not because of the round tails on the even later cars. _________________ Jason
My 64 1500 S Notchback project here
My 58 sedan project here
My 63 Ghia here |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
M_atthewanderson Samba Member
![](/vw/forum/images/avatars/2229508835f1a6a6571c7a.jpg)
Joined: January 25, 2005 Posts: 288 Location: Seattle
|
Posted: Wed Jun 10, 2015 11:45 am Post subject: |
|
|
For me, everything post NHTSA Federal Motor Vehicle Safety Standards and Regulation laws in 1967, and implemented in 68. bumpers got bigger and tail light got an additional bulb and lens color for turn signals. _________________ 1980 2.0 Sunroof Vanagon |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
fivelugshortaxle Samba Member
![](/vw/forum/images/avatars/206127551259e0368bdb13c.jpg)
Joined: May 13, 2011 Posts: 4254 Location: Aumsville, Oregon
|
Posted: Wed Jun 10, 2015 9:43 pm Post subject: |
|
|
lawn ninja wrote: |
56Cabrio wrote: |
fivelugshortaxle wrote: |
Fat chicks are the beetles with the big ass round tail lights |
I thought it was because of the big ass windows and stubby looking deck lids ? (Rear end ) |
It is because of the big windows, short hood, stubby engine lid and a number of other things. But that is the reason they are called fat chicks, not because of the round tails on the even later cars. |
Rear window in a 67 is the same size as in a 68. Hood length is also the same. Semantics. Kind of like the Berg or nothing crowd. But whatever, guess I like fat chicks ![Shocked](images/smiles/icon_eek.gif) _________________ Good things come to those who wait.
2332 with lots of goodies....
Rotating assembly balanced by Brothers VW
4340 84mm crank
AA 94mm p&c' s
Total seal 2nd ring, rest are Grants
5.5 h beams
Magnum straight cuts
Steve Long XR310 on a 106
CB 1.4 rockers
CB Magnaspark 2 distributor
NGK D7ea plugs
A1 lowdown 1 3/4 with single muffler
Dellorto 48's with 40 venturies
Kennedy Stage 2 with Daiken disc
Last edited by fivelugshortaxle on Thu Jun 11, 2015 3:34 am; edited 1 time in total |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
fivelugshortaxle Samba Member
![](/vw/forum/images/avatars/206127551259e0368bdb13c.jpg)
Joined: May 13, 2011 Posts: 4254 Location: Aumsville, Oregon
|
Posted: Wed Jun 10, 2015 9:44 pm Post subject: |
|
|
mattography wrote: |
I call >67 fat chicks, but i know some people its >72 for beetles. I think theres a locked thread on this discussion somewhere. All i know is the more im in reader rides lately the more i need a late beetle.
Are you going to keep the wing windows or going cal? |
Give me another month to post the pictures of the completed build. You'll really want one then. ![Twisted Evil](images/smiles/icon_twisted.gif) _________________ Good things come to those who wait.
2332 with lots of goodies....
Rotating assembly balanced by Brothers VW
4340 84mm crank
AA 94mm p&c' s
Total seal 2nd ring, rest are Grants
5.5 h beams
Magnum straight cuts
Steve Long XR310 on a 106
CB 1.4 rockers
CB Magnaspark 2 distributor
NGK D7ea plugs
A1 lowdown 1 3/4 with single muffler
Dellorto 48's with 40 venturies
Kennedy Stage 2 with Daiken disc |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
lawn ninja Samba Member
![](/vw/forum/images/avatars/13300838314e99f130de032.png)
Joined: January 02, 2006 Posts: 1009 Location: Round Rock, TX
|
Posted: Thu Jun 11, 2015 9:19 pm Post subject: |
|
|
Jesus don't be so sensitive. No one was insulting you or the car; matter of fact I like it, but its a fat chick. _________________ Jason
My 64 1500 S Notchback project here
My 58 sedan project here
My 63 Ghia here |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
fivelugshortaxle Samba Member
![](/vw/forum/images/avatars/206127551259e0368bdb13c.jpg)
Joined: May 13, 2011 Posts: 4254 Location: Aumsville, Oregon
|
Posted: Thu Jun 11, 2015 10:40 pm Post subject: |
|
|
yeah, man. I didn't mean it like that. Just messin. Anyway....found some problems with the body and paint work. Body shop is owning up to it and its going back to them for some fixes. Man, this thing is taking forever to complete. _________________ Good things come to those who wait.
2332 with lots of goodies....
Rotating assembly balanced by Brothers VW
4340 84mm crank
AA 94mm p&c' s
Total seal 2nd ring, rest are Grants
5.5 h beams
Magnum straight cuts
Steve Long XR310 on a 106
CB 1.4 rockers
CB Magnaspark 2 distributor
NGK D7ea plugs
A1 lowdown 1 3/4 with single muffler
Dellorto 48's with 40 venturies
Kennedy Stage 2 with Daiken disc |
|
Back to top |
|
![](/vw/forum/templates/subSilver/images/spacer.gif) |
|