sdebaker Samba Member
Joined: June 12, 2006 Posts: 228
|
Posted: Mon Sep 21, 2015 1:16 pm Post subject: Window-scraper retainer trim clips |
|
|
The new clips I bought to attach the metal strip on the outside, top edge of the door to hold the rubber, window-scraper strip won't stay in the slot in the metal strip. They are just a little too narrow. My old clips aren't any better.
The small, flat, retainer plate, after being slid in flat at the wide section of the slot, will get tilt and let the clip fall out.
I am highly dubious that some previous owner milled the slot wider.
What's the trick to keep them in the track? |
|