Jeep Parts For Fuel Evaporation Tanks?

[Silverghost500]

I seem to recall some folks using the rollover valves and grommets from Jeep vehicles on the Vanagon fuel evaporation tanks. Is that still a thing, or are we going back to VW parts?

If we're still using Jeep parts can someone provide part numbers for the valves and grommets?
_________________
1986 Volkswagen Vanagon Westfalia "Von Westy"
Honda K24A converversion-Road Testing Phase
3-Speed Automatic

Von Westy YouTube Channel
https://www.youtube.com/channel/UCbhyZYxJEQrUuLnMbLleeIA

[xoo00oox]

this is the roll-over valve-Dorman 911-060

this is the grommet-F6TZ9B076AA

[rfoubi]

on that note has anyone made a replacement for the tanks in general yet? seems like an opportunity! I've replaced my 30 yr old cracked tanks with 30yr old less cracked tanks and would love a solid option for next time

[xoo00oox]

https://www.vancafe.com/251201303-304C-ALUMKIT-p/251201303-304c-alumkit.htm


Pricey but will withstand a nuclear blast.

[Silverghost500]

Thanks for the parts info! I got to thinking if someone needed the parts and their tanks were still OK, they might find them at a local FLAPS.

The plastic tanks are available with Ken Wilford at Vanagain. I just ordered a replacement right tank as I found one evap hose nipple completely broken off, and the other with a crack.
_________________
1986 Volkswagen Vanagon Westfalia "Von Westy"
Honda K24A converversion-Road Testing Phase
3-Speed Automatic

Von Westy YouTube Channel
https://www.youtube.com/channel/UCbhyZYxJEQrUuLnMbLleeIA

[jlrftype7]