Author |
Message |
vwhammer Samba Member
Joined: May 20, 2006 Posts: 998 Location: Boulder CO.
|
Posted: Sun May 29, 2022 11:51 am Post subject: Early Vanagon Spindles with Later Vanagon Rotors |
|
|
I am working on a suspension redo on the front of my 90 Vanagon.
I already have a big brake kit that I built myself that works on either the late or early Vanagon spindles
For this brake swap, I machined the rotors to use as hubs.
For the new suspension setup, I need some new spindles as I have modified my existing spindles.
The main problem now is that I can only find early spindles for sale in all the usual places.
Been a minute since I have looked into any of this but I think I recall there being a difference in the early and late Vanagon wheel bearings and a quick search on Rockauto shows that there are different outer wheel bearings.
I believe the main difference is the ID of the early bearing but the OD is the same.
Can anyone confirm that all I need to do is buy an early outer bearing and I can use my later rotor that I have turned into a hub on the early spindles? _________________ Pretty normal daily driver build
https://www.thesamba.com/vw/forum/viewtopic.php?t=708418&highlight=
4x4 build
https://www.expeditionportal.com/forum/threads/volkswagen-vanagon-4x4-conversion.162055/ |
|
Back to top |
|
|
crazyvwvanman Samba Member
Joined: January 28, 2008 Posts: 9939 Location: Orbiting San Diego
|
Posted: Sun May 29, 2022 11:59 am Post subject: Re: Early Vanagon Spindles with Later Vanagon Rotors |
|
|
Yes, the outer bearing OD is the same, all years.
The ID got larger early in the 84 model year when PS became available.
Make sure you get a matching pair with regard to manual or PS since the tie rod location differs and thus steering ratio differs.
Mark |
|
Back to top |
|
|
mtnhome Samba Member
Joined: July 17, 2010 Posts: 500 Location: Summit County, CO
|
Posted: Sun May 29, 2022 5:00 pm Post subject: Re: Early Vanagon Spindles with Later Vanagon Rotors |
|
|
vwhammer wrote: |
For the new suspension setup, I need some new spindles as I have modified my existing spindles.
|
I have a couple of extra sets of early spindles if you need a set. I'm up in Summit County. PM me and we can touch base. _________________ '84 Westy, '93 Subaru ej22 and Subarugears 5speed
Build thread: https://www.thesamba.com/vw/forum/viewtopic.php?t=763098&highlight= |
|
Back to top |
|
|
vwhammer Samba Member
Joined: May 20, 2006 Posts: 998 Location: Boulder CO.
|
|
Back to top |
|
|
|