| Author |
Message |
Combinations
Samba Member
Joined: March 19, 2010
Posts: 286
Location: Massachussets
|
 Posted: Fri Nov 06, 2015 2:58 pm Post subject: bay 76 rear seat belt anchoring system |
 |
|
Hi guys, I am putting the seat belts that were originally installed then removed before I got my 1976 bus.
There are there belt set right?
The sides ones get attached on the side with bolts that also maintain the vertical part of the seat too correct?
Are these sides bolt the same as the middle ones?
Thanks
Aurel |
|
| Back to top |
|
 |
busdaddy
Samba Member
Joined: February 12, 2004
Posts: 51150
Location: Surrey B.C. Canada, but thinking of Ukraine
|
| Posted: Fri Nov 06, 2015 3:42 pm Post subject: |
|
|
If you mean the outer seat belt attach points on the fenderwells also secure the seat then yes, the seat hinge goes on first and the belt holds it down. All the bolts are the same thread, not sure if the ones that hold the seat are slightly longer.
_________________
Rust NEVER sleeps and stock never goes out of style.
Please don't PM technical questions, ask your problem in public so everyone can play along. If you think it's too stupid post it here
Stop dead photo links! Post your photos to The Samba Gallery!
Слава Україні! |
|
| Back to top |
|
|
Combinations
Samba Member
Joined: March 19, 2010
Posts: 286
Location: Massachussets
|
| Posted: Fri Nov 06, 2015 3:55 pm Post subject: |
|
|
| busdaddy wrote: |
| If you mean the outer seat belt attach points on the fenderwells also secure the seat then yes, the seat hinge goes on first and the belt holds it down. All the bolts are the same thread, not sure if the ones that hold the seat are slightly longer. |
Ok get it, thanks
Good point on the length , I guess they might be. The one I found seems too small. I will double check that tomorrow. |
|
| Back to top |
|
|
busdaddy
Samba Member
Joined: February 12, 2004
Posts: 51150
Location: Surrey B.C. Canada, but thinking of Ukraine
|
| Posted: Fri Nov 06, 2015 4:51 pm Post subject: |
|
|
Seatbelt bolt thread is universal for all cars, 7/16" NF if I'm not mistaken, the autowrecker will have some if Ace hardware doesn't.
_________________
Rust NEVER sleeps and stock never goes out of style.
Please don't PM technical questions, ask your problem in public so everyone can play along. If you think it's too stupid post it here
Stop dead photo links! Post your photos to The Samba Gallery!
Слава Україні! |
|
| Back to top |
|
|
|
