Author |
Message |
warmblood58 Samba Member
Joined: March 22, 2005 Posts: 331
|
Posted: Sun Feb 14, 2016 12:41 pm Post subject: Scored! Two pairs of Professionally Rebuilt G60 Calipers! |
|
|
Found a bargain on EBay - guy had two pairs of G60 calipers that were rebuilt by Porterfields plus some custom pads and a spare rebuild kit. 219.00 for pads, 4 calipers and rebuild kit! Time to get cracking on my big brake upgrade. Anyone use any particular vendor for the 276mm x 25mm rotors. Slotted and vented or just vented? I will be selling the extra pair of g60's calipers . . . |
|
Back to top |
|
|
newfisher Samba Member
Joined: January 05, 2012 Posts: 1764 Location: The wet spot--Oregon
|
Posted: Sun Feb 14, 2016 6:18 pm Post subject: Re: Scored! Two pairs of Professionally Rebuilt G60 Calipers! |
|
|
Pm sent |
|
Back to top |
|
|
insyncro Banned
Joined: March 07, 2002 Posts: 15086 Location: New York
|
Posted: Sun Feb 14, 2016 6:42 pm Post subject: Re: Scored! Two pairs of Professionally Rebuilt G60 Calipers! |
|
|
That auction was a good deal.
It was a relist believe it or not.
Someone won it and than didn't pay.
Dumb dumb move.
Glad you snagged them. |
|
Back to top |
|
|
warmblood58 Samba Member
Joined: March 22, 2005 Posts: 331
|
Posted: Sun Feb 14, 2016 9:07 pm Post subject: Re: Scored! Two pairs of Professionally Rebuilt G60 Calipers! |
|
|
insyncro wrote: |
That auction was a good deal.
It was a relist believe it or not.
Someone won it and than didn't pay.
Dumb dumb move.
Glad you snagged them. |
I thought so Dylan and these calipers were not Cardone or other units - Porterfield does good work. I thin I will pay a visit to my machinist tomorrow to get some M8 8mm spacers made. Anyone have a template so that the new carriers can be drilled correctly? I suppose I could just pull old calipers/carriers and have machine shop match spacing |
|
Back to top |
|
|
IdahoDoug Samba Member
Joined: June 12, 2010 Posts: 10248 Location: N. Idaho
|
Posted: Sun Feb 14, 2016 11:22 pm Post subject: Re: Scored! Two pairs of Professionally Rebuilt G60 Calipers! |
|
|
Just a suggestion, Warmblood, but if people knew where you lived from your signature there may be someone who has a caliper/carrier you can borrow for your machine shop. If you lived around here, I have several for instance. _________________ 1987 2WD Wolfsburg Vanagon Weekender "Mango", two fully locked 80 Series LandCruisers. 2017 Subaru Outback boxer. 1990 Audi 90 Quattro 20V with rear locking differential, 1990 burgundy parts Vanagon. 1984 Porsche 944, 1988 Toyota Supra 5 speed targa, 2002 BMW 325iX, 1982 Toyota Sunrader |
|
Back to top |
|
|
insyncro Banned
Joined: March 07, 2002 Posts: 15086 Location: New York
|
Posted: Mon Feb 15, 2016 1:41 am Post subject: Re: Scored! Two pairs of Professionally Rebuilt G60 Calipers! |
|
|
Yes, have them match a Vanagon carrier.
Many have called Small Car and purchased or were given the spacer they have had made. |
|
Back to top |
|
|
warmblood58 Samba Member
Joined: March 22, 2005 Posts: 331
|
Posted: Mon Feb 15, 2016 11:24 am Post subject: Re: Scored! Two pairs of Professionally Rebuilt G60 Calipers! |
|
|
Thanks Doug and Dylan! Most likely, since van is being worked on, I will remove one of my calipers/carriers and have machinist match or ValleyWagonWorks is down the road from me (nice guys, great shop, highly competent) and perhaps borrow one from them. On to bigger brakes! There are a few hoses to replace, does anyone offer syncro brakes hoses with outer wound spring covering (like certain german ATF line that connect to radiator) Not really a fan of the braided stainless lines, thanks! |
|
Back to top |
|
|
|