Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts  See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
AMR500 supercharger carb size?
Forum Index -> Vintage Speed Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Author Message
TinCanFab
Samba Member


Joined: April 04, 2006
Posts: 2526
Location: Waterford, California
TinCanFab is offline 

PostPosted: Wed Feb 24, 2016 4:35 pm    Post subject: AMR500 supercharger carb size? Reply with quote

So..... I had a pretty good running stock 40hp that was really a great runner in my daily for 1 1/2 years. I spent a few months going through it and all checked out well and looked to be a fresh rebuild, cut for a sand seal,etc. Then, this happened even though I never drove it hard:

Image may have been reduced in size. Click image to view fullscreen.


The #1 bearing dowel hole of the case was the only damage I found. The engine ran terribly, but with that unmistakable sound. I've got a spare case I pulled out and here's my plan:

Replacement case gets all needed machine work, cam bearings
Reuse the NOS pistons/cylinders 77mm with 3000 miles on them
Send DPR 1500 crank I have for balance (counterweight maybe?)
New header
Aisin AMR500 supercharger for low boost
Stock 40hp otherwise with a 5000 ish rev limit
009 distributor w/CB Black Box

I want to emulate a Shorrock type install and need to make intake/discharge manifolds. So, my question is which of these stock carbs would you use, and why? I have:



Really nice fresh build 28 PICT
Core 30 PICT 1
Core 30 PICT 2
Core 30 PICT 3
Really low mile 34 PICT 3 missing some small stuff
_________________
Check out my truck brought back from the dead... http://www.thesamba.com/vw/forum/viewtopic.php?t=420762&highlight=sprayed+blood

They're never really ever finished 58 rag build...
http://www.thesamba.com/vw/forum/viewtopic.php?t=658092
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> Vintage Speed All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2020, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB