Chenowth class 11 cage help!!!

Ratt · Posted: Fri Mar 12, 2004 4:51 pm Post subject: Chenowth class 11 cage help!!!

I started to weld in my cage. It seems that the rear hoop that goes back to the rear Fire-wall doesnt line up with the center hoop at all.

Image may have been reduced in size. Click image to view fullscreen.

If you look closely you can see that the notch doesnt line up with the top bar. What is my best bet to remady this? Does any one have a picturre of a cage already installed that they can post?

Thanks
Andy Rattley

62ragman · Posted: Sat Mar 13, 2004 10:45 pm Post subject:

Are the tubes notched diferently or the same?

bajaherbie · Posted: Sun Mar 14, 2004 7:36 am Post subject:

maybe you have the left side on the right side and vice versa...
or try to increase the notches to make it fit tight to the main hoop. tack weld it all toghter b-4 final welding.

Ratt · Posted: Sun Mar 14, 2004 1:57 pm Post subject:

They are notched exactly the same. Im going to renotch them. I found out that the inside needs to be clearanced farther back. So I get to use the good ole Die-grinder. I am in the process of tacking it together right now. Im hoping to get it finished tack this week, and then next week, I can work on full welds.
Andy


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> HBB Off-Road	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1