| Author |
Message |
bljones
Resident Wit
Joined: February 08, 2002
Posts: 2377
Location: ontario canada
|
 Posted: Fri Mar 12, 2004 6:58 pm Post subject: Windage tray |
 |
|
I'm building an autocross buggy, and am currently planning a "sweep the floor" engine build. In my stash of oddball goodies, i've found an old windage tray. any benefit to installing it in a mostly stock 1600?
_________________
OG JHC
Author of Original Rant #1
"It stingd itself to dead... now that is control on you"
2% |
|
| Back to top |
|
 |
turboblue
Samba Member
Joined: October 09, 2003
Posts: 4216
Location: Central Indiana
|
| Posted: Sat Mar 13, 2004 8:26 am Post subject: |
|
|
BL
Is it one of the older ones that fastened to the oil sump stud? Or one of the newer ones that just lay in the case? The first one had some value to keep the oil down where it needs to be. The second one is a POS that should be tossed in the scrap pile. My 2 cents......
_________________
Gary
Turbo VW Sand Drag Buggy
"If you don't run into the Devil every once in awhile, you must be going in the same direction!" |
|
| Back to top |
|
|
|
