Empi Sportster... hmmm...

[0nebadbug]

Was tooling around yesterday and stumbled on this...

It's on a'56 ('57 model year) pan...

What would you offer with what you see... ... I have a good idea where I'm at but just thought I would float it out for some opinion...

_________________
::: Slowoval ::: LaDawri Sebring ::: '61 Creampuff ::: Dust Storm '66 :::

[vwracerdave]

Looking at the pics as it sits $700. If it has a clear title and it runs and drives and stops then $1000-$1200. I'm guessing that when you start tearing it apart and stripping paint your gonna find lots of Bondo and lots of hidden rust.
_________________
2017 Street Comp Champion - Thunder Valley Raceway Park - Noble, OK
2010 Sportsman ET Champion - Mid-America Dragway - Arkansas City, KS
1997 Sportsman ET Champion - Thunder Valley Raceway Park - Noble ,OK
Featured in Dec. 2001 HOT VW's Magazine page 63

Watch my racing video's http://www.youtube.com/user/okvwracer/videos

[lewism]

Needs work. Additions are scabbed onto the front and rear fenders. There's an odd break in the hood line. These came as a kit or as build-it-you-own-self plans.

Instead of dealing with all that rust, just start with new metal and these plans:

http://beachwheels.blogspot.com/2011/01/very-early-sixties-1961-empi-sportster.html

[manxdavid]

I don't think it's a Sportster, it's just something that looks a bit like one.

[heywebonya]

$1000-1200 with title, $700 without.

There are lots of bits needed to get it ready to roll.
_________________
If I knew what I was doing; I wouldn't be building a buggy!

[vw7266]

200 not a sportster in my opinion looks like junk

[yankee1919]

Hello Onebadbug,

The general shape says Empi Sportster but the craftsmanship says "Hell No!"

Before you buy look up some images and get some measurements from an old Empi Sportster build blue prints.

If you want buy $200 what I would pay, tops.

Tony