Author |
Message |
britcay Samba Member
Joined: May 23, 2006 Posts: 53 Location: Somerset, England
|
Posted: Sun Apr 23, 2017 1:26 am Post subject: Seat identification help needed, Mk1 Golf GTi? |
|
|
Morning folks,
I'm looking for some help identifying my seats in a Beetle Cabriolet which a PO installed. I quite like them, they're very comfortable and don't look out of place, BUT the guy installed the 3rd rail bolted to the floor, so I'm missing the slider mechanism. I can loosen the 3rd rail bolt, move the seat then tighten up again, so I do have movement, but it's hardly elegant.
Looking for help to correctly identify the seat type (they look Mk1 Golf GTi to me) but they may be Mexican Beetle?
I'll get some more photos of the crazy mounting arrangements underneath later.
TIA
Andy _________________ 1969 Beetle Cabriolet
1963 Karmann Ghia coupe |
|
Back to top |
|
|
britcay Samba Member
Joined: May 23, 2006 Posts: 53 Location: Somerset, England
|
Posted: Sun Apr 23, 2017 10:40 am Post subject: Re: Seat identification help needed, Mk1 Golf GTi? |
|
|
alt view....
Mk1 Golf? _________________ 1969 Beetle Cabriolet
1963 Karmann Ghia coupe |
|
Back to top |
|
|
kamzcab86 Samba Moderator
Joined: July 26, 2008 Posts: 7924 Location: Arizona
|
Posted: Mon Apr 24, 2017 12:35 am Post subject: Re: Seat identification help needed, Mk1 Golf GTi? |
|
|
britcay wrote: |
Looking for help to correctly identify the seat type (they look Mk1 Golf GTi to me) |
Not specifically GTI, but Mk1 sports seats.
britcay wrote: |
BUT the guy installed the 3rd rail bolted to the floor, so I'm missing the slider mechanism. I can loosen the 3rd rail bolt, move the seat then tighten up again, so I do have movement, but it's hardly elegant.
|
Golf I (and II and a slew of other models) seats use the following components:
1) Rear glides inside tracks
2) Front center-mount rail and guide bracket
3) ...which require these bushings:
Part numbers for the front guide brackets:
443803241 Left
443803242 Right
171881229B Clinch bolt (1 per side)
113881275C Spring (1 per side)
You may be able to still get the brackets to weld in place. _________________ ~Kamz
1986 Cabriolet: www.Cabby-Info.com
1990 Vanagon Westfalia: Old Blue's Blog
2016 Golf GTI S
"Real knowledge is to know the extent of one's ignorance." - 孔子 |
|
Back to top |
|
|
|