AA's New 2.0 914 Castings

bugguy1967 · Posted: Sat Jun 17, 2017 9:09 am Post subject: AA's New 2.0 914 Castings

AA's new 914 2.0 bare castings. NOT AMC castings. I keep having people ask. This is not a typo. AA had these made. They are exact replicas, besides a couple different features:

Guides holes are the smaller Type 1 diameter on both the intake and exhaust. If you wanted to run the larger stock guide, the head would need to be reamed accordingly.

The breather bossed are tapped, and includes a screw-in barb or plug.

Unfortunately, the plug size is still the 14mm-3/4" reach. Should've been 12mm IMO.

At this time, they are on back order. They should be available again soon. $250 each.

Image may have been reduced in size. Click image to view fullscreen.

bugguy1967 · Posted: Sat Jun 17, 2017 9:10 am Post subject: Re: AA's New 2.0 914 Castings

bugguy1967 · Posted: Sat Jun 17, 2017 9:11 am Post subject: Re: AA's New 2.0 914 Castings

I spoke to the guy that was in charge of this development. He didn't want to make too many changes due to purist complaints. He considered beefing-up certain areas. Regardless of which route you go though, someone will complain.

djway3474 · Posted: Tue Jun 20, 2017 5:08 pm Post subject: Re: AA's New 2.0 914 Castings

They have beefed up certain areas to allow for more port work. The incoming shipment will have the changes and it sounded like they were on the boat.

bugguy1967 · Posted: Thu Jun 22, 2017 8:29 am Post subject: Re: AA's New 2.0 914 Castings

Wow! That's good to hear! I'm getting this set welded.


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Porsche - 911/912/914	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1