Author |
Message |
kevineo Samba Member
Joined: May 09, 2011 Posts: 49
|
Posted: Wed Jul 26, 2017 6:31 pm Post subject: Adrian vs Hamm head work |
|
|
Want my 79 Kombi Riviera 2.0 injected rebuilt. I'm in southern Ca. so from what I've read it's a no brainer...Adrian at HeadFlowMasters for the block.
I have also read Hamm/Hoffman Auto Machine has heads incomparable.
Complete rebuild as close to stock as possible with durability in mind.
Question is; those of you with experience with both or either: Hamm or Adrians headwork who reigns in quality, stability, longevity.
Pros and cons are appreciated ThankYou
|
|
Back to top |
|
|
hazetguy Samba Member
Joined: April 06, 2001 Posts: 10773 Location: iT StiNgeD iTseLf tO dEAd
|
Posted: Wed Jul 26, 2017 6:44 pm Post subject: Re: Adrian vs Hamm head work |
|
|
headflowmaster's feedback thread: https://www.thesamba.com/vw/forum/viewtopic.php?t=516448
not sure if this is the same HAM you are referring to (not that it matters based on the number of replies)
https://www.thesamba.com/vw/forum/viewtopic.php?t=475468
you might also try searching the feedback forum. _________________ thebucket: I invested in hoodride, now DBD won't return my call?
hazetguy: invested?
thebucket: Yeah Haze, its where people put money into a company in hopes of a return on their money |
|
Back to top |
|
|
kevineo Samba Member
Joined: May 09, 2011 Posts: 49
|
Posted: Wed Jul 26, 2017 7:03 pm Post subject: Re: Adrian vs Hamm head work |
|
|
Yes that is he, the Ham to which I refer. Minimal replies, your correct however I have come to trust SGKent. Thanks for the assist! |
|
Back to top |
|
|
Jim Bear Samba Member
Joined: March 25, 2006 Posts: 670 Location: Watkinsville, GA
|
Posted: Thu Jul 27, 2017 1:27 pm Post subject: Re: Adrian vs Hamm head work |
|
|
Someone correct me if I am wrong, but I believe Len at HAM only uses new AMC heads, strips the assembled components, 'cleans the heads up', and then retrofits with quality new components. It's the Blueprint Special for us. My understanding is that 1.8's may (or may not) be available upon special order. See here. _________________ "You're either on the bus, or you're off the bus." ~kk
'85 Vanagon Westy - George In the Stable 2020-?/'74 Weekender - Ophelia In the Stable 2007- ?/'69 Beetle Convertible - SOLD 2017-2020/'67 Beetle - September SOLD 2013-2016 /'67 SO42 Westy - Sage SOLD 1996-2001 /'69 Transporter - Baby Blue SOLD 1995-1995/'72 Westy - Nelly - SOLD 1990-1995--STOP FRACKING |
|
Back to top |
|
|
kevineo Samba Member
Joined: May 09, 2011 Posts: 49
|
Posted: Thu Jul 27, 2017 2:28 pm Post subject: Re: Adrian vs Hamm head work |
|
|
Just got off the phone with Len Hoffman, call him Bear he will answer any all questions thoroughly. 7607693783 Hoffman Auto Machine
He has two spots open for a pair of Blue Print Specials in this run set to begin in 2 weeks or sooner. |
|
Back to top |
|
|
SGKent Samba Member
Joined: October 30, 2007 Posts: 41031 Location: Citrus Heights CA (Near Sacramento)
|
Posted: Thu Jul 27, 2017 3:36 pm Post subject: Re: Adrian vs Hamm head work |
|
|
you want Len's heads. (Hoffman automotive machine). I personally would not have Headflow masters build me a block. My understanding is that the work can be spotty - my own attempts to contact Adrian have been that way as well. see http://itinerant-air-cooled.com/viewtopic.php?f=46&t=12989
There are several folks down there who can assist you in getting that engine rebuilt, Robbie being one. (Asiab3) _________________ “Most people don’t know what they’re doing, and a lot of them are really good at it.” - George Carlin |
|
Back to top |
|
|
kevineo Samba Member
Joined: May 09, 2011 Posts: 49
|
Posted: Thu Jul 27, 2017 3:47 pm Post subject: Re: Adrian vs Hamm head work |
|
|
I put my deposit in today. My bus, my peace of mind on the roads is worth every penny |
|
Back to top |
|
|
kevineo Samba Member
Joined: May 09, 2011 Posts: 49
|
Posted: Thu Jul 27, 2017 7:41 pm Post subject: Re: Adrian vs Hamm head work |
|
|
Just spent some time reading the Itinerant forum threads and I'm just floored. Feel as though I just dodged a bullet; thanks for the heads up! Seriously I'm grateful; however, sorry others had to suffer the inconvenience. |
|
Back to top |
|
|
|