Replacing 110V hookup

Johnny_Tenspeed · Posted: Sun Sep 17, 2017 10:23 am Post subject: Replacing 110V hookup

I got one of the replacement 110V hookups from GoWesty. I removed the 4 screws from the old hookup and it was still stuck to the side of the van. Is there something else holding it in place that I need to remove or does it just need to be pulled loose at this point?
_________________
'84 Westy

MarkWard · Posted: Sun Sep 17, 2017 12:14 pm Post subject: Re: Replacing 110V hookup

It will need to be pulled free. Someone may have silicone it last time, or the foam gasket is just attached too well. Obviously, be careful you don't damage the paint or bend the sheet metal.
_________________
☮️

PDXWesty · Posted: Sun Sep 17, 2017 3:46 pm Post subject: Re: Replacing 110V hookup

Johnny_Tenspeed · Posted: Sun Sep 17, 2017 11:00 pm Post subject: Re: Replacing 110V hookup

Thanks. I thought that was probably the case, but I wanted to make sure.
_________________
'84 Westy


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Vanagon	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1