Author |
Message |
hogan029 Samba Member
Joined: October 12, 2014 Posts: 407
|
Posted: Wed May 23, 2018 7:25 pm Post subject: Subaru Throttle Body |
|
|
Hi all,
Just wondering with the conversion fellas around here. When your gas pedal is pushed down to the floor, is your throttle body 100% open? I noticed that mine is only about 80% open.. I have tried to adjust the cable with zero success.. any tips or mods at the front end?
Thanks |
|
Back to top |
|
|
11BC2 Samba Member
Joined: August 27, 2017 Posts: 495 Location: Cool, California
|
Posted: Wed May 23, 2018 7:39 pm Post subject: Re: Subaru Throttle Body |
|
|
What year and model throttle body are you using? |
|
Back to top |
|
|
hogan029 Samba Member
Joined: October 12, 2014 Posts: 407
|
Posted: Wed May 23, 2018 7:56 pm Post subject: Re: Subaru Throttle Body |
|
|
It's from a 98 EJ25 |
|
Back to top |
|
|
11BC2 Samba Member
Joined: August 27, 2017 Posts: 495 Location: Cool, California
|
Posted: Wed May 23, 2018 9:58 pm Post subject: Re: Subaru Throttle Body |
|
|
Hmmmm...I will look at one in the morning, when I get to the shop. |
|
Back to top |
|
|
syncrodoka Samba Member
Joined: December 27, 2005 Posts: 12008 Location: Santa Cruz, CA
|
Posted: Wed May 23, 2018 10:08 pm Post subject: Re: Subaru Throttle Body |
|
|
I use the burley motorsports throttle conversion kit on my ej22s. No problem getting full throttle, been verified a few times. |
|
Back to top |
|
|
mackaymanx Samba Member
Joined: October 12, 2006 Posts: 479 Location: Australia
|
|
Back to top |
|
|
dobryan Samba Member
Joined: March 24, 2006 Posts: 16505 Location: Brookeville, MD
|
|
Back to top |
|
|
hogan029 Samba Member
Joined: October 12, 2014 Posts: 407
|
Posted: Thu May 24, 2018 5:44 am Post subject: Re: Subaru Throttle Body |
|
|
Ah okay makes sense. I don't know if I want to drop 100$ on the bracket from Burley. I keep trying to adjust things and then my idle is a little off cause of too much tension.. may just have to let things lie. |
|
Back to top |
|
|
jberger Samba Member
Joined: November 17, 2003 Posts: 2476
|
Posted: Thu May 24, 2018 8:12 am Post subject: Re: Subaru Throttle Body |
|
|
hogan029 wrote: |
Ah okay makes sense. I don't know if I want to drop 100$ on the bracket from Burley. I keep trying to adjust things and then my idle is a little off cause of too much tension.. may just have to let things lie. |
If I remember correctly, you can simply change the attachment point of the cable at the pedal lever under the cabin floor. It's been a while since I did my last one but I don't remember having to weld it... just drill it further out. This does make the pedal feel a bit more stiff though.
J |
|
Back to top |
|
|
Rorke Samba Member
Joined: August 04, 2016 Posts: 255 Location: Traverse City, MI
|
Posted: Thu May 24, 2018 9:55 am Post subject: Re: Subaru Throttle Body |
|
|
Hogan,
When you take your foot off the gas, does the RPM stay high? |
|
Back to top |
|
|
hogan029 Samba Member
Joined: October 12, 2014 Posts: 407
|
Posted: Thu May 24, 2018 10:27 am Post subject: Re: Subaru Throttle Body |
|
|
No it goes back down to idle when I take my foot off the gas. |
|
Back to top |
|
|
|