Author |
Message |
Gadwood74 Samba Member
Joined: May 04, 2018 Posts: 62 Location: Quebec
|
Posted: Mon Jun 25, 2018 1:54 pm Post subject: Ghia pan in type 3 - front curve |
|
|
This subject has been covered. But I can't see anywhere if the front curve is the same.
My original floor is so rotten that I can't tell when comparing both.
I'm a bit stressed to weld and the adapt the Ghia pan in place and see after that the curve would not be in line with the body...
The side of the original floor is not usuable.
|
|
Back to top |
|
|
Bobnotch Samba Member
Joined: July 06, 2003 Posts: 22431 Location: Kimball, Mi
|
Posted: Tue Jun 26, 2018 7:53 am Post subject: Re: Ghia pan in type 3 - front curve |
|
|
You might ask Michael at ISP West (he's on here regularly) if they offer the front section. If so, that might help you get that area fixed, so you could use the ghia pan halfs.
Your only other options are good used, and Gerson floor pans. _________________ Bob 65 Notch S with Sunroof
71 Notch ...aka Krunchy; build pics here;
http://www.thesamba.com/vw/forum/viewtopic.php?t=249390 -been busy working
64 T-34 Ghia...aka Wolfie, under construction... http://www.thesamba.com/vw/forum/viewtopic.php?t=412120
Tram wrote: |
"Friends are God's way of apologizing for relatives." |
Tram wrote: |
People keep confusing "restored" and "restroyed". |
|
|
Back to top |
|
|
Erik G Samba Member
Joined: October 16, 2002 Posts: 13281 Location: Tejas!
|
|
Back to top |
|
|
squaretobehip Samba Member
Joined: August 23, 2004 Posts: 3695 Location: San Jose, CA
|
Posted: Tue Jun 26, 2018 10:52 am Post subject: Re: Ghia pan in type 3 - front curve |
|
|
Bobnotch wrote: |
You might ask Michael at ISP West (he's on here regularly) if they offer the front section. If so, that might help you get that area fixed, so you could use the ghia pan halfs.
Your only other options are good used, and Gerson floor pans. |
We might. Your best bet is to call the shop directly or email [email protected]. I'm no longer onsite so I don't have the ability to check real quick. _________________ 1963 Notchback - Ruby Red
1963 Squareback - Pearl White
1965 Squareback - Baltic Blue
Follow ISP West on:
Facebook - www.facebook.com/ispwest
Instagram - @ispwest - www.instagram.com/ispwest |
|
Back to top |
|
|
Mike Fisher Samba Member
Joined: January 30, 2006 Posts: 17970 Location: Eugene, OR
|
Posted: Tue Jun 26, 2018 11:30 am Post subject: Re: Ghia pan in type 3 - front curve |
|
|
$60 for a piece of this plus shipping.
_________________ https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold
Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey |
|
Back to top |
|
|
Gadwood74 Samba Member
Joined: May 04, 2018 Posts: 62 Location: Quebec
|
Posted: Tue Jun 26, 2018 6:03 pm Post subject: Re: Ghia pan in type 3 - front curve |
|
|
Thanks guys. As I already have the Ghia pan in my hands, I guess I’ll be creative and adapt it. Certainly more challenging and time consuming,but at this point we have time to do so... shipping from the west coast is expensive and exchange rate is also playing against me... |
|
Back to top |
|
|
|