Author |
Message |
Buzzfagan Samba Member
Joined: April 03, 2016 Posts: 102 Location: Georgetown,Texas
|
Posted: Fri Feb 09, 2018 8:00 am Post subject: PRP Seats |
|
|
Looking at ordering some PRP seats for my El Lobo Manx Clone. I know they have the 19” Roadster that will definitely fit but I wanted to see if I could get another to fit so I could have some other features and comforts of some of their other seats.
Has anyone fit any of their other seats in their buggy? How did it go? Any obstacles?
I don’t have a lifted body and am too far into it to do that now so that is not really an option.
Please post some photos of your seats if possible.
Thanks for your help!! |
|
Back to top |
|
|
BL3Manx Samba Member
Joined: August 29, 2006 Posts: 6767 Location: Northern California
|
|
Back to top |
|
|
Buzzfagan Samba Member
Joined: April 03, 2016 Posts: 102 Location: Georgetown,Texas
|
Posted: Fri Feb 09, 2018 8:12 am Post subject: Re: PRP Seats |
|
|
Yeah just looking at PRP seats specifically |
|
Back to top |
|
|
Tom_Kathleen Samba Member
Joined: August 26, 2004 Posts: 919 Location: Vernon, CT
|
Posted: Fri Feb 09, 2018 8:33 am Post subject: Re: PRP Seats |
|
|
We just installed a set of PRP Premier seats in our Manx. They contact the side walls of the tub, but they do fit. We had Empi seats of the same 22" width before, and the problem is that sand & dirt will get between the seat and side of the tub and wear thru the paint/gellcoat. Tom _________________ Manxter #16, 1968 Meyers Manx & Kick-Out SS #16 (WIP)
Manx Club & CVA |
|
Back to top |
|
|
clonebug Samba Member
Joined: January 29, 2005 Posts: 4027 Location: NW Washington
|
Posted: Fri Feb 09, 2018 5:43 pm Post subject: Re: PRP Seats |
|
|
I bought a set of Corbeau seats once that were 21 inches wide......They were the most beautiful seats but try as I might I could not make them fit in my buggy without looking like they were wedged in.
My buggy is only 42 inches wide total so they took up all the space. I cried but I had to take them back and buy the PRP's.
The 19 inch PRP fits nicely but is only recommended for a 38 inch waste so they get a little tight if you are a person of larger frame....... _________________
vwracerdave wrote: |
Take a good long look in the mirror and report back on what you see. |
Paul.H wrote: |
That one line on that chart is probably better info than you can get from this place in a month |
My Megasquirt Fuel Injection Turbo Buggy Build
Water/Alcohol Injection
Audi TT intercooler
Upgraded to MS3Pro-Evo
EcuMaster PMU16
ECUMaster ADU5 Digital Dash
http://www.shoptalkforums.com/viewtopic.php?f=3&t=127936 |
|
Back to top |
|
|
|