Author |
Message |
mikemtnbike Samba Member
Joined: March 26, 2015 Posts: 2795 Location: North Carolina
|
Posted: Sun Apr 29, 2018 1:26 pm Post subject: radius arm bracket- need repair? |
|
|
So the sudden new creaking and wandering I just had on the way home was because I lost a radius arm bushing. Great.
Anyway, I drove it home for a few miles missing. The bracket hole does not really look ovalized to me, although the front edge does look like it sustained some impact.
What do you think- ok or need to call the mobile welder?
Top is from wheel wheel looking toward spare, second is out towards wheel well. That's a piece of paper to block the light coming through the hole.
_________________ 1991 Vanagon GL 2.1 AT Westfauxlia. "Frankie" Totaled https://www.thesamba.com/vw/forum/viewtopic.php?t=764510&highlight=carnage
1995 Eurovan Camper "Marzivan"
2020 GTI SE manual |
|
Back to top |
|
|
dobryan Samba Member
Joined: March 24, 2006 Posts: 16503 Location: Brookeville, MD
|
|
Back to top |
|
|
mikemtnbike Samba Member
Joined: March 26, 2015 Posts: 2795 Location: North Carolina
|
Posted: Sun Apr 29, 2018 3:43 pm Post subject: Re: radius arm bracket- need repair? |
|
|
Thanks for the reply, I feel like its fine to try running too but have no points of reference. I'll wrestle the other side off tomorrow, which will give me at least one.
I'd email T3 directly, but van-cafe has a pretty good sale going on the whiteline replacement kit that I've already ordered. I'm not going to "showroom" T3 by asking for advice on parts I'm not going to order from him. _________________ 1991 Vanagon GL 2.1 AT Westfauxlia. "Frankie" Totaled https://www.thesamba.com/vw/forum/viewtopic.php?t=764510&highlight=carnage
1995 Eurovan Camper "Marzivan"
2020 GTI SE manual |
|
Back to top |
|
|
Christopher Schimke Samba Member
Joined: August 03, 2005 Posts: 5390 Location: PNW
|
Posted: Sun Apr 29, 2018 3:56 pm Post subject: Re: radius arm bracket- need repair? |
|
|
If it were me, I would pull the aluminum cup out of the Powerflex kit and offer it up the hole to see how tight it fits. If it's a reasonable fit, then run it the way it is. If there is some slop in the fit, then decide if it's worth welding up or not.
By the way, for future reference, I'm always happy to price match whenever possible and I'm always happy to answer questions, even if it doesn't result in a sale. Never hesitate to ask. _________________ "Sometimes you have to build a box to think outside of." - Bruce (not Springsteen)
*Custom wheel hardware for Audi/VW, Porsche and Mercedes wheels - Urethane Suspension Bushings*
T3Technique.com or contact me at [email protected] |
|
Back to top |
|
|
mikemtnbike Samba Member
Joined: March 26, 2015 Posts: 2795 Location: North Carolina
|
Posted: Sun Apr 29, 2018 4:12 pm Post subject: Re: radius arm bracket- need repair? |
|
|
Thanks Christoper- I'm aware I indirectly directly asked for your input, as always appreciated. _________________ 1991 Vanagon GL 2.1 AT Westfauxlia. "Frankie" Totaled https://www.thesamba.com/vw/forum/viewtopic.php?t=764510&highlight=carnage
1995 Eurovan Camper "Marzivan"
2020 GTI SE manual |
|
Back to top |
|
|
Vanagon Nut Samba Member
Joined: February 08, 2008 Posts: 10371 Location: Sunshine Coast B.C.
|
Posted: Sun Apr 29, 2018 4:31 pm Post subject: Re: radius arm bracket- need repair? |
|
|
Just one point of reference but it looks better than what I had In my case, the arm wore through the sleeve. The arm also suffered damage.
Maybe someone has the OD measurement of a new bushing?
Neil.
_________________ 1981 Westy DIY 15º ABA
1988 West DIY 50º ABA
VE7TBN |
|
Back to top |
|
|
mikemtnbike Samba Member
Joined: March 26, 2015 Posts: 2795 Location: North Carolina
|
Posted: Wed May 02, 2018 5:27 pm Post subject: Re: radius arm bracket- need repair? |
|
|
New bushings went in great! The aluminum cup had almost no slop in the pictured hole; other side where had not lost bushing was actually worse, couldn't see it but one bushing was all wallowed out. Still fine though.
What I'm more surprised by is how much the ride is improved, noticeably smoother. Really makes me want to change out the rest...stupid slippery slope probably delaying my hightop mod... _________________ 1991 Vanagon GL 2.1 AT Westfauxlia. "Frankie" Totaled https://www.thesamba.com/vw/forum/viewtopic.php?t=764510&highlight=carnage
1995 Eurovan Camper "Marzivan"
2020 GTI SE manual |
|
Back to top |
|
|
dobryan Samba Member
Joined: March 24, 2006 Posts: 16503 Location: Brookeville, MD
|
|
Back to top |
|
|
|