Author |
Message |
olivetree Samba Member
Joined: July 31, 2005 Posts: 21 Location: Oakville, Ontario, Canada
|
Posted: Wed Jul 11, 2018 10:45 am Post subject: Levelling Disk Dimensions |
|
|
I am getting ready to level my 95 Eurovan Camper and I am planning to make my own leveling disks from UHMW plastic. I have found a reference to the outside diameter of the disk of 155mm but I can’t find the inner diameter of the hole in the center of the disk. Does anyone happen to have one handy that they haven’t installed yet that they can measure and pass on the dimensions? |
|
Back to top |
|
|
TDCTDI Samba Advocatus Diaboli
Joined: August 31, 2013 Posts: 12858 Location: North Carolina
|
Posted: Wed Jul 11, 2018 11:28 am Post subject: Re: Levelling Disk Dimensions |
|
|
ID 2", OD 6" _________________ Everybody born before 1975 has a story, good, bad, or indifferent, about a VW.
GOFUNDYOURSELF, quit asking everyone to do it for you!
An air cooled VW will make you a hoarder.
Do something, anything, to your project every day, and you will eventually complete it. |
|
Back to top |
|
|
olivetree Samba Member
Joined: July 31, 2005 Posts: 21 Location: Oakville, Ontario, Canada
|
Posted: Wed Jul 11, 2018 11:33 am Post subject: Re: Levelling Disk Dimensions |
|
|
TDCTDI wrote: |
ID 2", OD 6" |
Thank you so much. I really appreciate it
Mick |
|
Back to top |
|
|
bikes! Samba Member
Joined: April 27, 2014 Posts: 97 Location: Central CA Coast
|
|
Back to top |
|
|
TDCTDI Samba Advocatus Diaboli
Joined: August 31, 2013 Posts: 12858 Location: North Carolina
|
Posted: Wed Jul 11, 2018 1:20 pm Post subject: Re: Levelling Disk Dimensions |
|
|
THAT's perfect! _________________ Everybody born before 1975 has a story, good, bad, or indifferent, about a VW.
GOFUNDYOURSELF, quit asking everyone to do it for you!
An air cooled VW will make you a hoarder.
Do something, anything, to your project every day, and you will eventually complete it. |
|
Back to top |
|
|
Broseph Stalin Samba Member
Joined: March 28, 2018 Posts: 433 Location: Colorado
|
Posted: Wed Jul 11, 2018 3:28 pm Post subject: Re: Levelling Disk Dimensions |
|
|
The pucks I have from CaveVan Cole the ID is shy of 2", more like 1 7/8". Don't know if it matters. Cole's pucks are a perfect fit on the Bilstein 24-214230 rear shocks that arrived yesterday. _________________ '68 Bus in West Germany, 1977-1979
'67 Riviera poptop conversion in the US, 1984-1990
'95 EVC Winnie, 2018, Sold
'03 EVC Winnie, 2018, Sold |
|
Back to top |
|
|
|