Author |
Message |
tjet Samba Member
Joined: June 10, 2014 Posts: 3533 Location: CA & NM
|
Posted: Sun Sep 02, 2018 4:44 pm Post subject: Westfalia roof corner repair / doubler? |
|
|
I just picked up a mint pop top roof for my tin top, but I broke one of the corners off removing it from my van, about a 5" section. I was removing it by myself, which was a...
https://getyarn.io/yarn-clip/51a2ec50-a4fd-449f-b383-acd5c416b762
Has anyone fabricated a repair or made doubler plates for a corner repair? |
|
Back to top |
|
|
Marshj Samba Member
Joined: May 26, 2017 Posts: 268 Location: New Jersey
|
Posted: Sun Sep 02, 2018 6:41 pm Post subject: Re: Westfalia roof corner repair / doubler? |
|
|
tjet wrote: |
I just picked up a mint pop top roof for my tin top, but I broke one of the corners off removing it from my van, about a 5" section. I was removing it by myself, which was a...
https://getyarn.io/yarn-clip/51a2ec50-a4fd-449f-b383-acd5c416b762
Has anyone fabricated a repair or made doubler plates for a corner repair? |
I am coordinating a repair in my Multivan top. Cracked from a tree limb by the skylight. Look into boat and Jetski fiberglass work. There are reinforcements done there that have to take significant force - lots to learn from that community on fiberglassing. And most anything is repairable in the fiberglass world. I used to be a big standup Jetski finatic and even built a hull from scratch with a friend in a weekend using a mold
Lookup reinforcing superjet hull and you’ll start to learn some of the tricks that you can adopt to fixing your Westie corner |
|
Back to top |
|
|
Vanagon Nut Samba Member
Joined: February 08, 2008 Posts: 10379 Location: Sunshine Coast B.C.
|
Posted: Sun Sep 02, 2018 8:31 pm Post subject: Re: Westfalia roof corner repair / doubler? |
|
|
jet wrote: |
... I broke one of the corners off .... about a 5" section. |
edit: post deleted. Most likely not applicable.
Neil. _________________ 1981 Westy DIY 15º ABA
1988 West DIY 50º ABA
VE7TBN |
|
Back to top |
|
|
dobryan Samba Member
Joined: March 24, 2006 Posts: 16505 Location: Brookeville, MD
|
|
Back to top |
|
|
Bulli Klinik Samba Member
Joined: January 16, 2005 Posts: 2079 Location: Bulli Klinik, Colorado Springs
|
Posted: Mon Sep 03, 2018 6:45 am Post subject: Re: Westfalia roof corner repair / doubler? |
|
|
If you are referring to the metal portion of the top, you shouldn't have to fabricate anything as your tin top will have the same part, or you can get the broken section back into shape and weld it back to the top. _________________ I've never met a Bus I didn't like.
Mike K
Bulli Klinik
Colorado Springs |
|
Back to top |
|
|
|