Author |
Message |
Johnnybgoood Samba Member
Joined: October 21, 2009 Posts: 60 Location: United States
|
Posted: Mon Nov 05, 2018 6:56 pm Post subject: Walk throughs |
|
|
when was the first walk through made and what models were they offered in? |
|
Back to top |
|
|
srfndoc Samba Member
Joined: August 21, 2010 Posts: 3275 Location: SoCal
|
Posted: Mon Nov 05, 2018 7:44 pm Post subject: Re: Walk throughs |
|
|
Johnnybgoood wrote: |
when was the first walk through made and what models were they offered in? |
Oldest known is the Bob Hammond 55 BD Panel:
_________________ RPM=(MPH*336* (R&P*4th*1.26))/Tire Diameter in inches |
|
Back to top |
|
|
EverettB Administrator
Joined: April 11, 2000 Posts: 69809 Location: Phoenix Metro
|
|
Back to top |
|
|
Skim Rants Master
Joined: April 15, 2001 Posts: 17082 Location: GFK 31 Year Vet
|
Posted: Mon Nov 05, 2018 9:54 pm Post subject: Re: Walk throughs |
|
|
srfndoc wrote: |
Johnnybgoood wrote: |
when was the first walk through made and what models were they offered in? |
Oldest known is the Bob Hammond 55 BD Panel:
|
Can you imagine if you had to find those seats. _________________ GFK
Samba since before the towers collapsed. Still here.
1953 Kabriolet
1954 Sunroof
1959 Lowlight Ghia vert
1960 Lt Grey Double Cab SMZ LEGIT
1963 Deluxe Turkis Walk Thru 15 Window OG Paint |
|
Back to top |
|
|
Drew Ogden Samba Member
Joined: February 19, 2004 Posts: 329 Location: Elbow Cay, Bahamas
|
Posted: Mon Nov 05, 2018 10:01 pm Post subject: Re: Walk throughs |
|
|
The earliest standard walkthroughs were built in 1958.
|
|
Back to top |
|
|
mandraks Samba Member
Joined: November 28, 2004 Posts: 7047 Location: Lawrenceville, Ga
|
Posted: Tue Nov 06, 2018 7:07 am Post subject: Re: Walk throughs |
|
|
EverettB wrote: |
All models but Panels are the most common. |
with the obvious exception of Single cabs and Double cabs. _________________ regards
Uli
----------------------------------------
'53 3-Fold Oval, L35 Metallic Blue, looking for a narrow hatch panel |
|
Back to top |
|
|
dubstar Samba Member
Joined: January 17, 2009 Posts: 1437 Location: New York
|
Posted: Tue Nov 06, 2018 11:44 am Post subject: Re: Walk throughs |
|
|
a walk-thru double cab would be sweet...
mandraks wrote: |
EverettB wrote: |
All models but Panels are the most common. |
with the obvious exception of Single cabs and Double cabs. |
_________________ 1963 Type II Kombi
1977 Type I Fuel Injection
http://instagram.com/john_aka_dubstar/
http://web.stagram.com/n/john_aka_dubstar/
"you could transport really tall things too, like a giraffe" |
|
Back to top |
|
|
62DoKaGuy Samba Member
Joined: May 22, 2011 Posts: 1276 Location: Surprise, AZ
|
Posted: Tue Nov 06, 2018 12:04 pm Post subject: Re: Walk throughs |
|
|
dubstar wrote: |
a walk-thru double cab would be sweet...
mandraks wrote: |
EverettB wrote: |
All models but Panels are the most common. |
with the obvious exception of Single cabs and Double cabs. |
|
A local guy here in Sacramento area has a '61 DC, where the PO replaced the hacked up, rusted original bulkhead with a walk-thru section and seats. It looks great and should have been a factory option, much like the deletion of the rear seat & pedestal...the idea might be 60 years too late haha. Damn, it would have met the utilitarian criteria for me. _________________ ,,Wenige Menschen denken, und doch wollen alle entscheiden.'' -der Alte Fritz
EverettB wrote: |
...I went at it from both ends but going from the rear didn't seem to do anything, although I did spray some rust breaker in there... |
4/62 Double Cab
5/61 Panel (sold)
4/59 Single Cab (sold) |
|
Back to top |
|
|
Z Samba Member
Joined: June 15, 2003 Posts: 2517 Location: galveston, tx
|
Posted: Tue Nov 06, 2018 1:17 pm Post subject: Re: Walk throughs |
|
|
62DoKaGuy wrote: |
dubstar wrote: |
a walk-thru double cab would be sweet...
mandraks wrote: |
EverettB wrote: |
All models but Panels are the most common. |
with the obvious exception of Single cabs and Double cabs. |
|
A local guy here in Sacramento area has a '61 DC, where the PO replaced the hacked up, rusted original bulkhead with a walk-thru section and seats. It looks great and should have been a factory option, much like the deletion of the rear seat & pedestal...the idea might be 60 years too late haha. Damn, it would have met the utilitarian criteria for me. |
There have been a couple over the years, including one with corner windows, skylights and a sunroof, IIRC.
Definitely a cool setup. |
|
Back to top |
|
|
hitest Samba Member
Joined: September 30, 2008 Posts: 10296 Location: Prime Meridian, ID
|
Posted: Tue Nov 06, 2018 8:30 pm Post subject: Re: Walk throughs |
|
|
Z wrote: |
62DoKaGuy wrote: |
dubstar wrote: |
a walk-thru double cab would be sweet...
mandraks wrote: |
EverettB wrote: |
All models but Panels are the most common. |
with the obvious exception of Single cabs and Double cabs. |
|
A local guy here in Sacramento area has a '61 DC, where the PO replaced the hacked up, rusted original bulkhead with a walk-thru section and seats. It looks great and should have been a factory option, much like the deletion of the rear seat & pedestal...the idea might be 60 years too late haha. Damn, it would have met the utilitarian criteria for me. |
There have been a couple over the years, including one with corner windows, skylights and a sunroof, IIRC.
Definitely a cool setup. |
I've said it before- the most versatile model VW never made... _________________
EverettB wrote: |
I wonder what the nut looks like.
|
'62 L390 151, '62 L469 117, '63 L380 113, '64 L87 311, '65 L512 265, '65 L31 SO-42, '66 L360 251, '68 L30k 141, '71 L12 113, '74 ORG 181
FU#5 |
|
Back to top |
|
|
Bugugly Samba Member
Joined: January 16, 2008 Posts: 321 Location: Carson City, Nevada
|
Posted: Wed Nov 07, 2018 9:15 pm Post subject: Re: Walk throughs |
|
|
But don't forget the swivel seat panel walk-thru _________________ "When it rains...
It Pours" |
|
Back to top |
|
|
mandraks Samba Member
Joined: November 28, 2004 Posts: 7047 Location: Lawrenceville, Ga
|
Posted: Thu Nov 08, 2018 8:34 am Post subject: Re: Walk throughs |
|
|
62DoKaGuy wrote: |
A local guy here in Sacramento area has a '61 DC, where the PO replaced the hacked up, rusted original bulkhead with a walk-thru section and seats. It looks great and should have been a factory option, much like the deletion of the rear seat & pedestal...the idea might be 60 years too late haha. Damn, it would have met the utilitarian criteria for me. |
speaking of rear seat delete for the DC. Always wondered why there was not a folding seat option without a pedestal so you could stick stuff under the seat? and fold it up to get bulky stuff in there.
If i ever build another crewcab, i will definitely do that.
Also: there is really no reason not to have a driver side treasure chest door for the DC.
and, clearly the coolest one would be a RHD crewcab with the suicide rear door. with semaphores _________________ regards
Uli
----------------------------------------
'53 3-Fold Oval, L35 Metallic Blue, looking for a narrow hatch panel |
|
Back to top |
|
|
Who.Me? Samba Member
Joined: July 14, 2014 Posts: 2207 Location: UK (South)
|
Posted: Thu Nov 08, 2018 10:50 am Post subject: Re: Walk throughs |
|
|
62DoKaGuy wrote: |
A local guy here in Sacramento area has a '61 DC, where the PO replaced the hacked up, rusted original bulkhead with a walk-thru section and seats. It looks great and should have been a factory option |
From the technical specs for 61 models, DCs had the lowest payload rating @ 1543 pounds. (SCs were a little more at 1764 and panels had the highest at 1830).
https://www.thesamba.com/vw/archives/info/infoimages.php
They all used the same brakes and transmission, so the differences must reflect what VW thought the different structures could handle.
Taking out the bulkead would have weakened the DC structure further. Maybe belly pans would have fixed that, but maybe not. I'd guess VW went for practicality over convenience. _________________ Andy
Looking for info on my truck's history. Are you from Campbell California or nearby. Do you recognise it? ... http://www.thesamba.com/vw/forum/viewtopic.php?t=636786 |
|
Back to top |
|
|
62DoKaGuy Samba Member
Joined: May 22, 2011 Posts: 1276 Location: Surprise, AZ
|
Posted: Thu Nov 08, 2018 11:19 am Post subject: Re: Walk throughs |
|
|
Who.Me? wrote: |
62DoKaGuy wrote: |
A local guy here in Sacramento area has a '61 DC, where the PO replaced the hacked up, rusted original bulkhead with a walk-thru section and seats. It looks great and should have been a factory option |
From the technical specs for 61 models, DCs had the lowest payload rating @ 1543 pounds. (SCs were a little more at 1764 and panels had the highest at 1830).
https://www.thesamba.com/vw/archives/info/infoimages.php
They all used the same brakes and transmission, so the differences must reflect what VW thought the different structures could handle.
Taking out the bulkead would have weakened the DC structure further. Maybe belly pans would have fixed that, but maybe not. I'd guess VW went for practicality over convenience. |
"Weakened the DC structure" and "practicality" are not as important as looking cool, Andy hahaha, just joshin'. I hear ya, though; structural integrity is certainly important. I wonder how much weaker, if at all or measurable, a walk-thru section is/would be compared to a complete bulkhead section...
Either way, it would certainly have been a tits option, and as codename mandraks said, a smaller treasure chest on a DC would have really stroked my utilitarian cord haha. _________________ ,,Wenige Menschen denken, und doch wollen alle entscheiden.'' -der Alte Fritz
EverettB wrote: |
...I went at it from both ends but going from the rear didn't seem to do anything, although I did spray some rust breaker in there... |
4/62 Double Cab
5/61 Panel (sold)
4/59 Single Cab (sold) |
|
Back to top |
|
|
Who.Me? Samba Member
Joined: July 14, 2014 Posts: 2207 Location: UK (South)
|
Posted: Thu Nov 08, 2018 11:56 am Post subject: Re: Walk throughs |
|
|
62DoKaGuy wrote: |
"Weakened the DC structure" and "practicality" are not as important as looking cool, Andy hahaha, just joshin'. |
Yeah, I know.
I was surprised that trucks couldn't handle as much load as a panel, until I started to think about how the load is transmitted around the body.
Anyhow, back to the walk throughs _________________ Andy
Looking for info on my truck's history. Are you from Campbell California or nearby. Do you recognise it? ... http://www.thesamba.com/vw/forum/viewtopic.php?t=636786 |
|
Back to top |
|
|
easy e Samba Member
Joined: May 28, 2008 Posts: 3931 Location: 1 hr north of Santa Barbara
|
Posted: Tue Nov 13, 2018 8:27 am Post subject: Re: Walk throughs |
|
|
Who.Me? wrote: |
From the technical specs for 61 models, DCs had the lowest payload rating @ 1543 pounds. (SCs were a little more at 1764 and panels had the highest at 1830).
https://www.thesamba.com/vw/archives/info/infoimages.php
... differences must reflect what VW thought the different structures could handle.
Taking out the bulkead would have weakened the DC structure further. |
287 pound range between panel & DC doesn't seem like much.
The differences in load is probably because the DC/SC load bed is higher in elevation that the cargo floor of a panel. Reduced load for SC/DC is probably for stability concerns vs. structural.
The bulkhead is perpindicular to the front / back wheels... so, it doesn't add much strength in the front to back direction (vs. walk through). _________________ aka: Evan
Spreadsheet for Bus RPM, based on gearing & tire size (Excel format)
Searchable, click-navigable 1958 Bus Parts List |
|
Back to top |
|
|
Lind Samba Member
Joined: November 06, 2000 Posts: 9915 Location: idaho
|
Posted: Tue Nov 13, 2018 8:59 am Post subject: Re: Walk throughs |
|
|
easy e wrote: |
Who.Me? wrote: |
From the technical specs for 61 models, DCs had the lowest payload rating @ 1543 pounds. (SCs were a little more at 1764 and panels had the highest at 1830).
https://www.thesamba.com/vw/archives/info/infoimages.php
... differences must reflect what VW thought the different structures could handle.
Taking out the bulkead would have weakened the DC structure further. |
287 pound range between panel & DC doesn't seem like much.
The differences in load is probably because the DC/SC load bed is higher in elevation that the cargo floor of a panel. Reduced load for SC/DC is probably for stability concerns vs. structural.
The bulkhead is perpindicular to the front / back wheels... so, it doesn't add much strength in the front to back direction (vs. walk through). |
You guys are way overthinking this.
The different models have different weights. The maximum gross weight is the same across the model line.
max gross weight = unladen weight + payload _________________ .
Wanted:
Idaho VW license plate frames or other dealership items.
VWoA literature and early dealership or distributor literature/pictures/information
. |
|
Back to top |
|
|
easy e Samba Member
Joined: May 28, 2008 Posts: 3931 Location: 1 hr north of Santa Barbara
|
|
Back to top |
|
|
mandraks Samba Member
Joined: November 28, 2004 Posts: 7047 Location: Lawrenceville, Ga
|
Posted: Tue Nov 13, 2018 11:20 am Post subject: Re: Walk throughs |
|
|
Who.Me? wrote: |
62DoKaGuy wrote: |
A local guy here in Sacramento area has a '61 DC, where the PO replaced the hacked up, rusted original bulkhead with a walk-thru section and seats. It looks great and should have been a factory option |
From the technical specs for 61 models, DCs had the lowest payload rating @ 1543 pounds. (SCs were a little more at 1764 and panels had the highest at 1830).
https://www.thesamba.com/vw/archives/info/infoimages.php
They all used the same brakes and transmission, so the differences must reflect what VW thought the different structures could handle.
Taking out the bulkhead would have weakened the DC structure further. Maybe belly pans would have fixed that, but maybe not. I'd guess VW went for practicality over convenience. |
this was a simple function of gross weight minus unladen weight.
Crewcab weighs 300 pounds more than a panel, and also more than a single cab.
gross weight is the same at 4112.
As far as structural stability goes, i think the Crew Cab is prolly as sturdy as it gets.
engineers who know please chime in. I only had 2 semesters of mechanical engineering and that was 30 some years ago _________________ regards
Uli
----------------------------------------
'53 3-Fold Oval, L35 Metallic Blue, looking for a narrow hatch panel |
|
Back to top |
|
|
Who.Me? Samba Member
Joined: July 14, 2014 Posts: 2207 Location: UK (South)
|
Posted: Tue Nov 13, 2018 2:02 pm Post subject: Re: Walk throughs |
|
|
Fair enough. I guess gross weight reflects what the brakes could handle and they are likely to be the weakest link as all body styles have the same max gross weight.
Apologies to the OP for the thread drift.
I still think a DC would be fail earlier if you loaded them all up to breaking point though.
The forward support of the load platform transmits the point load closer to the midpoint of the floor/frame in a DC than a SC, and there is no monocoque-type body structure to resist bending like a bus/van where the load also is distributed (across the floor).
I do not wish to test that hypothesis though. _________________ Andy
Looking for info on my truck's history. Are you from Campbell California or nearby. Do you recognise it? ... http://www.thesamba.com/vw/forum/viewtopic.php?t=636786 |
|
Back to top |
|
|
|