Author |
Message |
slave1pilot Samba Member
Joined: February 22, 2010 Posts: 943 Location: Tehachapi CA
|
Posted: Wed Dec 05, 2018 11:49 am Post subject: Carpet kit fitment question (59 pan, 63 body) |
|
|
Hey guys,
Ol' Herb has a 1959 pan, but a 1963 body.
I want to order a carpet kit but want to make sure it fits my specific situation.
Should I order for a '59 or a '63?
Probably going with TMI _________________ My Photobucket for my Herbie Project - http://s1288.photobucket.com/user/TK-439/library/Herbie?sort=3&page=1
Currently:
1963 Ragtop Beetle
Previously:
1967 Beetle
1968 Beetle
1970 Beetle |
|
Back to top |
|
|
mukluk Samba Member
Joined: October 18, 2012 Posts: 7028 Location: Clyde, TX
|
Posted: Wed Dec 05, 2018 1:56 pm Post subject: Re: Carpet kit fitment question (59 pan, 63 body) |
|
|
From what I recall, the '59 would not have had a passenger footrest and it would have had an extra hole in the firewall carpet for the fuel tap lever whereas the '63 would have a footrest and no fuel tap lever hole. Of course most carpet kits nowadays don't come with the fuel tap lever hole, regardless of what year you're ordering for, so that's unlikely to be a deciding factor. So basically what it comes down to is whether or not you have and wish to keep the passenger footrest or not. _________________ 1960 Ragtop w/Semaphores "Inga" |
|
Back to top |
|
|
hitest Samba Member
Joined: September 30, 2008 Posts: 10296 Location: Prime Meridian, ID
|
Posted: Wed Dec 05, 2018 7:12 pm Post subject: Re: Carpet kit fitment question (59 pan, 63 body) |
|
|
I would bet you could talk with a maker of German square weave kits about a custom order (WCCR and WW). I don't know what TMI "thinks" should be where on your car.
Do '59s have metal trim around the heater outlets? _________________
EverettB wrote: |
I wonder what the nut looks like.
|
'62 L390 151, '62 L469 117, '63 L380 113, '64 L87 311, '65 L512 265, '65 L31 SO-42, '66 L360 251, '68 L30k 141, '71 L12 113, '74 ORG 181
FU#5 |
|
Back to top |
|
|
my59 Samba Member
Joined: August 13, 2003 Posts: 3793 Location: connecting the dots
|
Posted: Thu Dec 06, 2018 3:03 am Post subject: Re: Carpet kit fitment question (59 pan, 63 body) |
|
|
hitest wrote: |
Do '59s have metal trim around the heater outlets? |
No, they did not. Carpet binding edge. _________________ my59: Well son, my grandfather died before I got to drive it, so does that answer your question?
our79: sunroof bus w/camper interior and 2.0 FI
Other:'12 Jetta, '77 Benz 300D, and a 74 MG Midget. |
|
Back to top |
|
|
panicman Samba Member
Joined: December 18, 2011 Posts: 2290 Location: Canby, OR
|
Posted: Thu Dec 06, 2018 9:00 am Post subject: Re: Carpet kit fitment question (59 pan, 63 body) |
|
|
Wolfsburg will install the metal trim around the heater outlets on squareweave kits if desired- or they used to.
Slave1pilot, do you want the interior to look more like a 63 or more like a 59?
For the 63 look, you could get a footrest, and your 63 will already have the slot in the firewall to mount it. That would mean buying a one piece rubber mat that would cover the front foot wells and the hump. You would also have a one piece in the back to cover the floor and hump in the back.
For the 59 look, leave the footrest out, and you’ll get two piece mats front and rear, and carpet on the hump.
I think I have all this correct, and you get to choose which one you like! _________________ Plate of shrimp |
|
Back to top |
|
|
slave1pilot Samba Member
Joined: February 22, 2010 Posts: 943 Location: Tehachapi CA
|
Posted: Thu Dec 06, 2018 2:50 pm Post subject: Re: Carpet kit fitment question (59 pan, 63 body) |
|
|
Thank you everyone
Iwould like the footrest , so ‘63 it is.
I just Wasn’t sure about heater controls,shift boots,heater outlets etc.
I didnt Wanna buy the wrong year and have the vents covered or something weird _________________ My Photobucket for my Herbie Project - http://s1288.photobucket.com/user/TK-439/library/Herbie?sort=3&page=1
Currently:
1963 Ragtop Beetle
Previously:
1967 Beetle
1968 Beetle
1970 Beetle |
|
Back to top |
|
|
panicman Samba Member
Joined: December 18, 2011 Posts: 2290 Location: Canby, OR
|
Posted: Thu Dec 06, 2018 6:37 pm Post subject: Re: Carpet kit fitment question (59 pan, 63 body) |
|
|
I was curious so I went to the WW site. If you get their front rubber mat, it looks like you cut the holes for the e brake, shifter, and heat knob.
I was wrong about one thing apparently; the 59 had a separate rubber mat for the hump, not carpet. Sorry! _________________ Plate of shrimp |
|
Back to top |
|
|
slave1pilot Samba Member
Joined: February 22, 2010 Posts: 943 Location: Tehachapi CA
|
Posted: Tue Dec 25, 2018 7:29 pm Post subject: Re: Carpet kit fitment question (59 pan, 63 body) |
|
|
Today is Christmas Day and my decision was made for me lol
My son and his wife bought me a salt and pepper carpet kit from CIP1
With Footrest
so now I'm in the market for a foot rest lol _________________ My Photobucket for my Herbie Project - http://s1288.photobucket.com/user/TK-439/library/Herbie?sort=3&page=1
Currently:
1963 Ragtop Beetle
Previously:
1967 Beetle
1968 Beetle
1970 Beetle |
|
Back to top |
|
|
mukluk Samba Member
Joined: October 18, 2012 Posts: 7028 Location: Clyde, TX
|
Posted: Thu Dec 27, 2018 7:07 pm Post subject: Re: Carpet kit fitment question (59 pan, 63 body) |
|
|
Maybe I'm reading your most recent post the wrong way, but what you have pictured in the carpet pic isn't a footrest, only the driver's side wear pad. The footrest is the angled metal panel in the passenger footwell as shown in the pic below.
_________________ 1960 Ragtop w/Semaphores "Inga" |
|
Back to top |
|
|
slave1pilot Samba Member
Joined: February 22, 2010 Posts: 943 Location: Tehachapi CA
|
Posted: Fri Dec 28, 2018 9:47 am Post subject: Re: Carpet kit fitment question (59 pan, 63 body) |
|
|
I know What the foot rest is, I was Only showing a pic of the carpet.
The carpet kit is available with or without the foot rest. Mine was cut for a foot rest.
I still Need to find a foot rest for my car
I didnt Phrase the other post very well. It made sense to me, but not to anyone else lol _________________ My Photobucket for my Herbie Project - http://s1288.photobucket.com/user/TK-439/library/Herbie?sort=3&page=1
Currently:
1963 Ragtop Beetle
Previously:
1967 Beetle
1968 Beetle
1970 Beetle |
|
Back to top |
|
|
slave1pilot Samba Member
Joined: February 22, 2010 Posts: 943 Location: Tehachapi CA
|
Posted: Sat Jan 05, 2019 11:42 pm Post subject: Re: Carpet kit fitment question (59 pan, 63 body) |
|
|
Foot rest arrived today
I will Clean up the rust on it and repaint it before carpeting
_________________ My Photobucket for my Herbie Project - http://s1288.photobucket.com/user/TK-439/library/Herbie?sort=3&page=1
Currently:
1963 Ragtop Beetle
Previously:
1967 Beetle
1968 Beetle
1970 Beetle |
|
Back to top |
|
|
|