| Author |
Message |
CloudClap
Samba Member
Joined: December 02, 2017
Posts: 5
Location: Oregon
|
 Posted: Sun Dec 30, 2018 5:50 pm Post subject: 1995 EVC: Vent replacement with MaxxAir 00-06200k Maxxfan |
 |
|
I updated the broken vent in our 1995 EVC with a MaxxAir 00-06200k Maxxfan.
These are the two best sources of information that I was able to find for this upgrade. Here you can find detailed instructions, tool list, etc.
https://1705.net/maxxair-roof-fan/ (I've added several pics to this thread)
https://faroutride.com/maxxfan-review/#Installation
1) The Maxxfan requires enlarging the 14 x 8 inch hole in your pop top to 14 x 14 inches.
2) The Maxxfan is tall even when closed adding about 4 inches to the van's height. If you park your van in a garage check this dimension. I can't drive the van into my garage with the Maxfann open-- a bit of risk.
If you view these images in my photo gallery there are more details.
|
|
| Back to top |
|
 |
Antinoro
Samba Member
Joined: December 07, 2019
Posts: 1
Location: Castle Pines, Co
|
| Posted: Mon Apr 19, 2021 6:40 pm Post subject: Re: 1995 EVC: Vent replacement with MaxxAir 00-06200k Maxxfan |
|
|
| This post has been extremely helpful. Ive located a source for the StarBoard, but was not sure which white matches the MaxxFan. Do you happen to remember which white you used? |
|
| Back to top |
|
|
|
