Microsquirt Subaru Coil Pack Wiring ??

[Jocipo]

I got my engine about two weeks ago EJ 22 single port exhaust it came out of a 71 bus and I want to put it in my 71 bus. Auto Werks in Oregon did the original conversion. It came with a stinger 4424 version 4 ECU. I don’t know anything about this ECU. So I’m going to try and get it wired up to a Microsquirt. I pretty much got all the wiring figured out except one thing. I’ve searched through the forums and just can’t find any info on this. I need help identifying the three wires coming out of the coil pack. There’s Yellow, Red, and Blue. The question is... Which one is

12 V positive........(pretty sure this is Red)

Ignition to cylinder 1-3

Ignition to cylinder 2-4

I hope somebody can help me out.... Thanks

[clonebug]

If it's still on the engine just trace the plug wires from #1 to the coil and look at the wire color.
My guess is left side looking at the plug would be coil #A, red would be power and the last would be Coil B.
_________________

[Dale M.]

IS it my eyes or is there color reversals between male and female side of plug in picture....


Dale
_________________
“Fear The Government That Wants To Take Your Guns" - Thomas Jefferson.

"Kellison Sand Piper Roadster" For Street & Show.
"Joe Pody Sandrover" Buggy with 2180 for Autocross (Sold)
============================================================
All suggestions and advice are purely my own opinion. You are free to ignore them if you wish ...

[mcmscott]

Subys are not 1-3 and 2-4 1324 So it would be 1-2 and 3-4
_________________
There are no stupid questions, only stupid people,

68 Ghia
67 T-1
65 Notch
02 Mexican beetle
74 Thing
15 Long travel rail
07 Nomad
05 f-250

[Jocipo]

Dale it’s not your eyes the wires do reverse colors after the clip.... Thanks for the info guys