70 bug engine look wired up correctly?

[DaVonZip]

New rebuilt engine, 30 Pic 1 carb (my choice).. But using existing wires, seem correct? Thanks, there's a red wire coming out next to the wiring harness it seems to go to the dash somewhere?

_________________
-No, the point is, it's your frickin car. Drive it. park it, light the bitch on fire-- it's not for us to say. (samba member)

-For once in my life, i'd like to get up in the morning and be as happy as my pennis is... (samba member)

[Cusser]

This one appears to be OK

This too

That leaves a wire to go to the oil pressure sending unit.
_________________
1970 VW (owned since 1972) and 1971 VW Convertible (owned since 1976), second owner of each. The '71 now has the 1835 engine, swapped from the '70. Second owner of each. 1988 Mazda B2200 truck, 1998 Frontier, 2014 Yukon, 2004 Frontier King Cab. All manual transmission except for the Yukon. http://www.thesamba.com/vw/forum/album_page.php?pic_id=335294 http://www.thesamba.com/vw/forum/album_page.php?pic_id=335297

[DaVonZip]

Thanks cusser, look at first Pic again, I have a wire piggybacked to the spring on carb,can I make one also to oil sending unit using same wire?
_________________
-No, the point is, it's your frickin car. Drive it. park it, light the bitch on fire-- it's not for us to say. (samba member)

-For once in my life, i'd like to get up in the morning and be as happy as my pennis is... (samba member)

[Multi69s]

[mukluk]

[ashman40]

This simplified diagram from Speedy Jim's site shows everything downstream from the single black #15 wire coming out of the harness and going to the #15 (+) terminal of the ignition coil.

It does NOT show the blue/green wire from the OIL indicator lamp in the speedo. This additional wire comes out from the harness and connects to the terminal on the oil pressure switch below the distributor.

_________________
AshMan40
---------------------------
'67 Beetle #1 {project car that never made it to the road }
'75 Beetle 1200LS (RHD Japan model) {junked due to frame rot}
'67 Beetle #2 {2019 project car - Wish me luck!}

[Chickensoup]

Hi guys. i searched. but couldnt find an engine diagram. i need a wiring diagram for a 1600 with a generator. Does anyone know where i could find one?

Thanks
_________________
-'85 c10 5.3 LS, 222 cam, long tubes, x pipe, 3 inch spin tech's
-'05 B5.5 TDI Wagon 17in sport rims ;EGR + BSM + ASV Delete, Stage-2 Tune, straight pipe
'65 Tourist Delivery Build
'66 RIP
'69 RIP
Hosea 4:6 "My people are destroyed for lack of knowledge"

[busdaddy]

From here: https://www.thesamba.com/vw/archives/info/wiringt1.php

_________________
Rust NEVER sleeps and stock never goes out of style.

Please don't PM technical questions, ask your problem in public so everyone can play along. If you think it's too stupid post it here
Stop dead photo links! Post your photos to The Samba Gallery!

Слава Україні!

[Chickensoup]

Thanks. I think the issue was I was looking for an engine only diagram but this will work. Thanks again.
_________________
-'85 c10 5.3 LS, 222 cam, long tubes, x pipe, 3 inch spin tech's
-'05 B5.5 TDI Wagon 17in sport rims ;EGR + BSM + ASV Delete, Stage-2 Tune, straight pipe
'65 Tourist Delivery Build
'66 RIP
'69 RIP
Hosea 4:6 "My people are destroyed for lack of knowledge"