| Author |
Message |
1994Karuso
Samba Member
Joined: November 08, 2018
Posts: 156
Location: PacNW
|
 Posted: Sat Aug 17, 2019 9:35 pm Post subject: Re: Another window Problem... |
 |
|
Bad switch? If you have power to the switch and can run the motor with cables thats all thats left.
| hellacasey wrote: |
Hello guys. First yes I have searched and searched and searched.
I have a 93 that the windows are not operating. I have power to the motor and switches. I can roll them up and down with jumper cables. None of the wires in the door jam were broke but the insulation on a couple was so I cut and spliced them back together. What now? I'm getting so frustrated but I'm hoping somebody can steer me in the right direction here. Thank you so much ahead of time for your input! |
|
|
| Back to top |
|
 |
hellacasey
Samba Member
Joined: June 17, 2006
Posts: 11
|
| Posted: Sat Aug 17, 2019 6:58 pm Post subject: Another window Problem... |
|
|
Hello guys. First yes I have searched and searched and searched.
I have a 93 that the windows are not operating. I have power to the motor and switches. I can roll them up and down with jumper cables. None of the wires in the door jam were broke but the insulation on a couple was so I cut and spliced them back together. What now? I'm getting so frustrated but I'm hoping somebody can steer me in the right direction here. Thank you so much ahead of time for your input! |
|
| Back to top |
|
|
|
