Author |
Message |
Aussie59Cab Samba Member
Joined: April 15, 2011 Posts: 136 Location: Australia
|
Posted: Tue Mar 11, 2014 11:58 pm Post subject: Dual filament front parking/turn signal bulb spec? |
|
|
Looking for the correct dual filament bulb specification (6 volt) for the front turn signals/parking lights for my 59.
Thanks _________________ 59 Karmann Ghia Cabriolet
56 RHD Oval |
|
Back to top |
|
|
c21darrel Samba Member
Joined: January 22, 2009 Posts: 8211 Location: San Dimas
|
|
Back to top |
|
|
rbsurfguy Samba Member
Joined: August 10, 2008 Posts: 1757 Location: Fairfax, Northern Virginia Formerly Huntington Beach, SoCal
|
Posted: Mon May 11, 2020 11:45 am Post subject: Re: Dual filament front parking/turn signal bulb spec? |
|
|
Can anyone tell me the various bulb numbers for turn/brake lights, small front turn signal bulb (running light?), back up light bulb? What I mean is the common numbers if I was to do a search for automotive bulbs, for example BS175...whatever they are? Am I asking this correctly?
Bulbs are old and can't see the numbers on them. I know there are single and dual filament. Just need the standard or common number.
I am sure I saw a topic on this but can't seem to find the correct search word to find the discussion. A link to the discussion or the common numbers would be helpful. Looked in the owners manual and the Bentley.
Thanks,
Jeff _________________ 1971 Ghia convertible (Body off rebuild)
2019 VW Atlas 4Motion
2012 Passat-Sold
See my build on The Samba at:
Jeff's 71 Vert Restoration/Reassembly http://www.thesamba.com/vw/forum/viewtopic.php?t=6...highlight= |
|
Back to top |
|
|
rbsurfguy Samba Member
Joined: August 10, 2008 Posts: 1757 Location: Fairfax, Northern Virginia Formerly Huntington Beach, SoCal
|
Posted: Mon May 11, 2020 11:52 am Post subject: Re: Dual filament front parking/turn signal bulb spec? |
|
|
Sorry, found this after searching forever, I believe this information is correct and what I was seeking.
NWGhiaGuy wrote: |
Bulbs are sized by their number, not brand. For 12V, the large two filament bulb is #1157, the single filament is #1156, and the small single filament is #89. These are universal bulb numbers and should be what you have. |
Sorry for not digging further..............
Jeff _________________ 1971 Ghia convertible (Body off rebuild)
2019 VW Atlas 4Motion
2012 Passat-Sold
See my build on The Samba at:
Jeff's 71 Vert Restoration/Reassembly http://www.thesamba.com/vw/forum/viewtopic.php?t=6...highlight= |
|
Back to top |
|
|
runamoc Samba Member
Joined: June 19, 2006 Posts: 5601 Location: 37.5N 77.1W
|
Posted: Tue May 12, 2020 5:25 am Post subject: Re: Dual filament front parking/turn signal bulb spec? |
|
|
Quote: |
standard or common number |
Not all bulbs are created equal...
1034 Low = 8.3w High = 23.0w
1157 Low = 8.3w High = 26.8w
2057 Low = 6.7w High = 26.8w
2357 Low = 8.3w High = 28.2w _________________ Daily driver: '69 Baja owned 44 yrs - Plan B: '81 Rabbit Diesel LS Deluxe - Plan C: '72 Ghia
Yard Art: 2 Sandrails
Outback: '69 Ghia - '68,'69,'70,'72 Beetle - '84 Scirocco, GTI - Pair of '02 Golfs-
VW Wiring = It's just wires |
|
Back to top |
|
|
|