Author |
Message |
rkwfxd Samba Member
Joined: March 17, 2013 Posts: 107 Location: Whittier
|
Posted: Sat Oct 10, 2020 4:08 pm Post subject: What size nuts are on the Trans Mount Plate? |
|
|
This is a 64 pan.
What size nuts do I need for the front trans mount plate that is welded to the back of the pan?
I have the oval rubber mount that is bolted to the protruding bolts that are already on this plate but I do not have the nuts for those bolts and none of the nuts or dies that I have at home thread onto those studs.
The part number I am referring to is 111701173C. Link to Wolf West is below to show what I am talking about.
http://www.wolfsburgwest.com/cart/DetailsList.cfm?ID=111701173c
Thanks |
|
Back to top |
|
|
Double-Double Samba Member
Joined: October 25, 2019 Posts: 640 Location: Oregon
|
Posted: Sat Oct 10, 2020 4:43 pm Post subject: Re: What size nuts are on the Trans Mount Plate? |
|
|
rkwfxd wrote: |
This is a 64 pan.
What size nuts do I need for the front trans mount plate that is welded to the back of the pan?
I have the oval rubber mount that is bolted to the protruding bolts that are already on this plate but I do not have the nuts for those bolts and none of the nuts or dies that I have at home thread onto those studs.
The part number I am referring to is 111701173C. Link to Wolf West is below to show what I am talking about.
http://www.wolfsburgwest.com/cart/DetailsList.cfm?ID=111701173c
Thanks |
10mm-1.5 _________________ “If anyone desires to come after Me, let him deny himself, and take up his cross, and follow Me. For whoever desires to save his life will lose it, but whoever loses his life for My sake will find it.”
—Matthew 16:24–25 |
|
Back to top |
|
|
rkwfxd Samba Member
Joined: March 17, 2013 Posts: 107 Location: Whittier
|
Posted: Sat Oct 10, 2020 4:49 pm Post subject: Re: What size nuts are on the Trans Mount Plate? |
|
|
Double-Double wrote: |
rkwfxd wrote: |
This is a 64 pan.
What size nuts do I need for the front trans mount plate that is welded to the back of the pan?
I have the oval rubber mount that is bolted to the protruding bolts that are already on this plate but I do not have the nuts for those bolts and none of the nuts or dies that I have at home thread onto those studs.
The part number I am referring to is 111701173C. Link to Wolf West is below to show what I am talking about.
http://www.wolfsburgwest.com/cart/DetailsList.cfm?ID=111701173c
Thanks |
10mm-1.5 |
May God Bless you and your descendants in every way possible for generations to come.
This car/project is killing me.
Every
Single
Nut
and
Bolt
All of them.
thanks again. |
|
Back to top |
|
|
|