| Author |
Message |
DaveVHS
Samba Member
Joined: September 27, 2020
Posts: 31
Location: Brisbane QLD
|
 Posted: Sun Feb 21, 2021 8:55 pm Post subject: '73 rear spring plate bush sizes? |
 |
|
Does anyone know the rear bush sizes for a '73 coupe
I have the 26 9/16" torsion bar
I purchased lowered spring plates but need to purchase bushes and most websites have 1 7/8" or 1 3/8" bushes (smooth and knobbly) I'm not 100% sure what bushes I need to order.
I think it is the 1 7/8" (47mm) but appreciate any input |
|
| Back to top |
|
 |
runamoc 
Samba Member
Joined: June 19, 2006
Posts: 4796
Location: 37.5N 77.1W
|
| Posted: Tue Feb 23, 2021 7:03 am Post subject: Re: '73 rear spring plate bush sizes? |
|
|
you will need 2 of the knobby and 2 of the smooth. The bushings do not fit the torsion bars. They fit the spring plate. Knobby on the inside, smooth on the outside, then cover plate. Measure the diameter of the spring plate that goes into the car and get that size.
_________________
Daily driver: '69 Baja owned 41 yrs - Plan B: '81 Rabbit Diesel LS Deluxe - Plan C: '72 Ghia
In garage for rehab: '71 Beetle
Yard Art: 2 Sandrails
Outback: '69 Ghia - '68,'69,'70,'72 Beetle - '84 Scirocco, GTI - Pair of '02 Golfs-
VW Wiring = It's just wires |
|
| Back to top |
|
|
DaveVHS
Samba Member
Joined: September 27, 2020
Posts: 31
Location: Brisbane QLD
|
| Posted: Tue Feb 23, 2021 6:26 pm Post subject: Re: '73 rear spring plate bush sizes? |
|
|
| runamoc wrote: |
| you will need 2 of the knobby and 2 of the smooth. The bushings do not fit the torsion bars. They fit the spring plate. Knobby on the inside, smooth on the outside, then cover plate. Measure the diameter of the spring plate that goes into the car and get that size. |
thanks, yeah I knew I needed both but turns out I was looking at racing urethane bushes not standard bushes which only come in one size anyway...I'm not racing so went with std |
|
| Back to top |
|
|
|
