Author |
Message |
Chickensoup Samba Member
Joined: January 06, 2018 Posts: 5368 Location: Good Hope, GA
|
Posted: Sat Apr 24, 2021 4:24 pm Post subject: what model was this tool set from? |
|
|
I have a nearly complete hazet tool set and was wondering if it's possible to identify what model and possibly year car it came from?
It's going in my car either way but I was just curious.
Thanks
_________________ -'85 c10 5.3 LS, 222 cam, long tubes, x pipe, 3 inch spin tech's
-'05 B5.5 TDI Wagon 17in sport rims ;EGR + BSM + ASV Delete, Stage-2 Tune, straight pipe
'65 Tourist Delivery Build
'66 RIP
'69 RIP
Hosea 4:6 "My people are destroyed for lack of knowledge" |
|
Back to top |
|
|
Abscate Samba Member
Joined: October 05, 2014 Posts: 22668 Location: NYC/Upstate/ROW
|
Posted: Sat Apr 24, 2021 5:26 pm Post subject: Re: what model was this tool set from? |
|
|
A 1974 Bus with a Sooby engine
( sorry) _________________ .ssS! |
|
Back to top |
|
|
iowegian Samba Curmudgeon
Joined: February 16, 2005 Posts: 9829 Location: Somewhere between Dubuque and Keokuk
|
Posted: Sat Apr 24, 2021 6:46 pm Post subject: Re: what model was this tool set from? |
|
|
Abscate wrote: |
A 1974 Bus with a Sooby engine
( sorry) |
What color was the bus? |
|
Back to top |
|
|
Abscate Samba Member
Joined: October 05, 2014 Posts: 22668 Location: NYC/Upstate/ROW
|
Posted: Sun Apr 25, 2021 3:29 am Post subject: Re: what model was this tool set from? |
|
|
Embarrassed red _________________ .ssS! |
|
Back to top |
|
|
oprn Samba Member
Joined: November 13, 2016 Posts: 12730 Location: Western Canada
|
Posted: Sun Apr 25, 2021 5:17 am Post subject: Re: what model was this tool set from? |
|
|
That is not a Bus jack! Other than that all the earlier (pre-'71) tool kits were pretty much the same as I recall. It would be hard to put a year or a model on one. _________________ We had the stone age, the bronze age, the industrial age and now we are in the age of mass deception and mind control for corporate profit. (The mass media age) |
|
Back to top |
|
|
raygreenwood Samba Member
Joined: November 24, 2008 Posts: 21519 Location: Oklahoma City
|
Posted: Sun Apr 25, 2021 6:52 am Post subject: Re: what model was this tool set from? |
|
|
Yes.....except for small variations....usually in jack type and length.....sometimes in the material making up the tool kit bag.....most of the tool kits across models and years were the same or pretty close.
For example....ust at a glance with that jack type and size.....thats pretty much the identical kit that would come in a 1971 VW 411.....which i doubt is what you are working with ....so you just KNOW that other cars used the same kit. Except that in most 411 the small lever bar in the 411 kit would usually be straight.
Ray |
|
Back to top |
|
|
mark tucker Samba Member
Joined: April 08, 2009 Posts: 23937 Location: SHALIMAR ,FLORIDA
|
Posted: Sun Apr 25, 2021 10:44 am Post subject: Re: what model was this tool set from? |
|
|
hazit a name on it? |
|
Back to top |
|
|
Chickensoup Samba Member
Joined: January 06, 2018 Posts: 5368 Location: Good Hope, GA
|
Posted: Sun Apr 25, 2021 3:51 pm Post subject: Re: what model was this tool set from? |
|
|
mark tucker wrote: |
hazit a name on it? |
_________________ -'85 c10 5.3 LS, 222 cam, long tubes, x pipe, 3 inch spin tech's
-'05 B5.5 TDI Wagon 17in sport rims ;EGR + BSM + ASV Delete, Stage-2 Tune, straight pipe
'65 Tourist Delivery Build
'66 RIP
'69 RIP
Hosea 4:6 "My people are destroyed for lack of knowledge" |
|
Back to top |
|
|
Abscate Samba Member
Joined: October 05, 2014 Posts: 22668 Location: NYC/Upstate/ROW
|
Posted: Mon Apr 26, 2021 4:13 am Post subject: Re: what model was this tool set from? |
|
|
mark tucker wrote: |
hazit a name on it? |
A tip of the hat to the Tucker...
_________________ .ssS! |
|
Back to top |
|
|
wheel607 Samba Member
Joined: May 30, 2004 Posts: 1847
|
Posted: Mon Apr 26, 2021 6:41 am Post subject: Re: what model was this tool set from? |
|
|
Nozit! |
|
Back to top |
|
|
mark tucker Samba Member
Joined: April 08, 2009 Posts: 23937 Location: SHALIMAR ,FLORIDA
|
Posted: Mon Apr 26, 2021 4:58 pm Post subject: Re: what model was this tool set from? |
|
|
well hear it go's. it's name is rusty jack.... |
|
Back to top |
|
|
Chickensoup Samba Member
Joined: January 06, 2018 Posts: 5368 Location: Good Hope, GA
|
Posted: Mon Apr 26, 2021 5:04 pm Post subject: Re: what model was this tool set from? |
|
|
mark tucker wrote: |
well hear it go's. it's name is rusty jack.... |
Never heard of her _________________ -'85 c10 5.3 LS, 222 cam, long tubes, x pipe, 3 inch spin tech's
-'05 B5.5 TDI Wagon 17in sport rims ;EGR + BSM + ASV Delete, Stage-2 Tune, straight pipe
'65 Tourist Delivery Build
'66 RIP
'69 RIP
Hosea 4:6 "My people are destroyed for lack of knowledge" |
|
Back to top |
|
|
Abscate Samba Member
Joined: October 05, 2014 Posts: 22668 Location: NYC/Upstate/ROW
|
Posted: Tue Apr 27, 2021 1:14 am Post subject: Re: what model was this tool set from? |
|
|
Chickensoup wrote: |
mark tucker wrote: |
well hear it go's. it's name is rusty jack.... |
Never heard of her |
Minnie Driver _________________ .ssS! |
|
Back to top |
|
|
|