| Author |
Message |
krisbeetle
Samba Member
Joined: September 30, 2005
Posts: 778
|
 Posted: Wed May 18, 2022 11:56 pm Post subject: How to dissasemble Ignition lock cylinder ? |
 |
|
My new key cut by code won't turn the lock cylinder or any other correct key.
Lock cylinder is out.
I can't find anything on dissasembling the lock cylinder itself to check out if wafers are not fully clearing barrel........
Do you have to drive out the pin at the bottom or?
1973 |
|
| Back to top |
|
 |
kreemoweet
Samba Member
Joined: March 13, 2008
Posts: 3898
Location: Seattle, WA
|
| Posted: Thu May 19, 2022 6:31 pm Post subject: Re: How to dissasemble Ignition lock cylinder ? |
|
|
All the non-ignition lock cylinders I've dealt with were held in place by a tiny set screw, that rode in a groove at the
far end of the cylinder.
_________________
'67 bug: seized by the authorities
'68 bug: seized by the authorities
'71 kombi: not yet seized by the authorities
Stop dead photo links! Post your photos to The Samba Gallery! |
|
| Back to top |
|
|
aeromech
Samba Member
Joined: January 24, 2006
Posts: 16961
Location: San Diego, California
|
| Posted: Fri May 20, 2022 6:57 pm Post subject: Re: How to dissasemble Ignition lock cylinder ? |
|
|
Send the key and cylinder to gabe
(214) 673-1033
http://gabvwkey.com/
_________________
Lead Mechanic: San Diego Air and Space Museum
Licensed Airframe and Powerplant Mechanic
Licensed Pilot (Single engine Land)
Boeing 727,737-200-300-400,757,767
Airbus A319,320,321
DC9/MD80
BAe146
Fokker F28/F100
VW type 1 1962,63,65,69,72
VW Type 2 1971 (3 ea.) 1978, 1969
VW Jetta
VW Passat
Capable of leaping tall buildings in a single bound |
|
| Back to top |
|
|
|
