1200 (Big bore) Cam options

[Theichelberger]

I've got a question, would a scat C20 cam (.352 lift(w/1.1 rockers) Duration:277) work with this set up. I've got a 40hp case set up with a 1385cc bore kit with 1300 heads and dual single barrel carbs. Is this too much cam or should I stick with the stock cam? I'm just looking for a mild power increase nothing crazy.

[Lingwendil]

my instinct is the lift may be fine but the duration may be a smidge much for smaller dual single barrels unless you have some plenum under them. I think it should be similar to an Engle W100 just with a bit less lift. If you can tolerate a choppy idle It'll probably work well.
_________________
73 super beetle thread http://www.thesamba.com/vw/forum/viewtopic.php?t=649622 Back on the Road!

Modify your Kadrons for SVDA http://www.thesamba.com/vw/forum/viewtopic.php?p=8115884#8115884

Cast iron VJU4BR8 SVDA reference thread- https://www.thesamba.com/vw/forum/viewtopic.php?t=...mp;start=0

Need replacement filters for original Kadron aircleaners? WIX #42087 is a perfect fit, as is Napa Gold #2087!

[jarmchairpilot]

I think a CB cheater cam would be the best option.