Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Fiberglassing rail with stretch wrap??
Forum Index -> Body/Paint Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Author Message
ORANGECRUSHer
Samba Member


Joined: June 09, 2006
Posts: 3123
Location: West Coast (Michigan's)
ORANGECRUSHer is offline 

PostPosted: Mon Feb 27, 2023 5:29 pm    Post subject: Fiberglassing rail with stretch wrap?? Reply with quote

I need you fiberglass experts to put my curiosity to rest, please.

I have a tube framed buggy I want to make body panels for. I would start with hood, sides and a roof. Since every buggy is different I want to make my own. It seems like in the past I've seen where you can wrap something in stretch wrap, the stuff they use in shipping departments to wrap skids of product, and then lay the fiberglas over the top.

I've done very small fiberglass projects in the past and this seems like a fun challenge. Maybe you can give me the ins and outs of fiberglassing without a mold on stretch wrap.
_________________
Brian H.

OrangeCrushERBerrien Warrior-2.4L Quad4-2x3 arms-1.5Fox coilovers-094-930CVs
LAZY MARY1970 Baja 2110cc-82mm CB forged crank-AA pistons/cylinders-Grant rings-1.1 vw rockers-CB serpkit-CB chromoly PRs-CB maxiflow filter pump-wix51515 filter-cut/turned front beam-AEM wideband-Auber CHT
Back to top
View user's profile Send private message Gallery Classifieds Feedback
viiking
Samba Member


Joined: May 10, 2013
Posts: 2886
Location: Sydney Australia
viiking is offline 

PostPosted: Mon Feb 27, 2023 8:31 pm    Post subject: Re: Fiberglassing rail with stretch wrap?? Reply with quote

I'm not a fibreglass expert but would you be using stretch wrap or shrink wrap?

These are both used in logistics for pallet wrapping and are two different animals.

Stretch wrap is as it says 'stretched' over an item. It elongates in any direction. Downside is that it can crease which can cause issues obviously with appearance on a "buck".

Shrink wrap on the other hand is laid loosely over an item and then is heated and it assumes the shape of the item. Methinks this would be the appropriate stuff to use if you are trying to cover a body part rather than stretch wrap.

I have in the past just used normal plastic sheet just to prevent the stickiness between layers of fibreglass and it is not a problem and is not affected by the resin.
_________________
1968 1500 RHD Lotus White Beetle since birth. In the hospital for major surgery
1966 Lancia Flavia Pininfarina Coupe - in the waiting room
Discharged: 1983 Vanagon, 1974 1800 Microbus,1968 Low Light,1968 Type 3
Back to top
View user's profile Send private message Gallery Classifieds Feedback
ORANGECRUSHer
Samba Member


Joined: June 09, 2006
Posts: 3123
Location: West Coast (Michigan's)
ORANGECRUSHer is offline 

PostPosted: Mon Feb 27, 2023 10:26 pm    Post subject: Re: Fiberglassing rail with stretch wrap?? Reply with quote

Stretch.
I was just envisioning carefully wrapping around where I needed to work. Maybe creating more structure to hold up the glass or using padding to create some distance around objects. I figure the backside won't be pretty but who cares, the problem would be making flat looking panels and I wonder how well it would hold up. Fiberglass is expensive and time-consuming so I'm not even sure if it's a better option over aluminum. The only real benefit is easy repair and it wont dent.
_________________
Brian H.

OrangeCrushERBerrien Warrior-2.4L Quad4-2x3 arms-1.5Fox coilovers-094-930CVs
LAZY MARY1970 Baja 2110cc-82mm CB forged crank-AA pistons/cylinders-Grant rings-1.1 vw rockers-CB serpkit-CB chromoly PRs-CB maxiflow filter pump-wix51515 filter-cut/turned front beam-AEM wideband-Auber CHT
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Nacho_74
Samba Member


Joined: March 22, 2018
Posts: 72
Location: Norwalk,California
Nacho_74 is offline 

PostPosted: Tue Feb 28, 2023 7:45 am    Post subject: Re: Fiberglassing rail with stretch wrap?? Reply with quote

I would think that the plastic wrap and or stretch wrap would expand & sag during the initial curing of the epoxy because of the heat it generates.

Back in my teenage years we used flannel material to shape custom subwoofer enclosures and then overlay the fiberglass with epoxy resin. There's videos on the University of YouTube on this method.
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
ORANGECRUSHer
Samba Member


Joined: June 09, 2006
Posts: 3123
Location: West Coast (Michigan's)
ORANGECRUSHer is offline 

PostPosted: Tue Feb 28, 2023 11:43 am    Post subject: Re: Fiberglassing rail with stretch wrap?? Reply with quote

Yeah, I didn't think about the heat. The plastic would not be enough to support it. I think trying to do something on the cheap and fast like this probably isn't gonna cut it and lead to more work in the end.
_________________
Brian H.

OrangeCrushERBerrien Warrior-2.4L Quad4-2x3 arms-1.5Fox coilovers-094-930CVs
LAZY MARY1970 Baja 2110cc-82mm CB forged crank-AA pistons/cylinders-Grant rings-1.1 vw rockers-CB serpkit-CB chromoly PRs-CB maxiflow filter pump-wix51515 filter-cut/turned front beam-AEM wideband-Auber CHT
Back to top
View user's profile Send private message Gallery Classifieds Feedback
viiking
Samba Member


Joined: May 10, 2013
Posts: 2886
Location: Sydney Australia
viiking is offline 

PostPosted: Tue Feb 28, 2023 1:23 pm    Post subject: Re: Fiberglassing rail with stretch wrap?? Reply with quote

There’s plenty of people on

the internet making free form articles out of fibreglass or epoxy. They use plastic sheet, packaging tape and also wax paper. If you’re making large structures then you’ll need support.

Sheets of polyurethane foam perhaps?

Normally you’d make a “buck” first as a female mould, then glass that to pop out the part.
_________________
1968 1500 RHD Lotus White Beetle since birth. In the hospital for major surgery
1966 Lancia Flavia Pininfarina Coupe - in the waiting room
Discharged: 1983 Vanagon, 1974 1800 Microbus,1968 Low Light,1968 Type 3
Back to top
View user's profile Send private message Gallery Classifieds Feedback
ORANGECRUSHer
Samba Member


Joined: June 09, 2006
Posts: 3123
Location: West Coast (Michigan's)
ORANGECRUSHer is offline 

PostPosted: Tue Feb 28, 2023 2:47 pm    Post subject: Re: Fiberglassing rail with stretch wrap?? Reply with quote

Yes, I've watched a ton of really good videos but it seems like people who make videos about this stuff don't have jobs and can spend their lives making molds for entire vehicles and sanding them till their elbows fall off. I really like fiberglass stuff but I really should just stick with metal. I think I just needed to get it off my chest and be done with it. Laughing
_________________
Brian H.

OrangeCrushERBerrien Warrior-2.4L Quad4-2x3 arms-1.5Fox coilovers-094-930CVs
LAZY MARY1970 Baja 2110cc-82mm CB forged crank-AA pistons/cylinders-Grant rings-1.1 vw rockers-CB serpkit-CB chromoly PRs-CB maxiflow filter pump-wix51515 filter-cut/turned front beam-AEM wideband-Auber CHT
Back to top
View user's profile Send private message Gallery Classifieds Feedback
simon varley
Samba Member


Joined: March 12, 2020
Posts: 175
Location: Geelong Australia
simon varley is offline 

PostPosted: Tue Feb 28, 2023 4:29 pm    Post subject: Re: Fiberglassing rail with stretch wrap?? Reply with quote

acrylic or polycarb sheet. mould to shape with a heat gun. then either use directly, or use as your fibreglass mould.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
ORANGECRUSHer
Samba Member


Joined: June 09, 2006
Posts: 3123
Location: West Coast (Michigan's)
ORANGECRUSHer is offline 

PostPosted: Tue Feb 28, 2023 5:11 pm    Post subject: Re: Fiberglassing rail with stretch wrap?? Reply with quote

Hey i like that idea, but have you priced a sheet of lexan lately? It's not light either.
_________________
Brian H.

OrangeCrushERBerrien Warrior-2.4L Quad4-2x3 arms-1.5Fox coilovers-094-930CVs
LAZY MARY1970 Baja 2110cc-82mm CB forged crank-AA pistons/cylinders-Grant rings-1.1 vw rockers-CB serpkit-CB chromoly PRs-CB maxiflow filter pump-wix51515 filter-cut/turned front beam-AEM wideband-Auber CHT
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> Body/Paint All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2024, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB
Links to eBay or other vendor sites may be affiliate links where the site receives compensation.