Injector clamp size question

jkaput · Posted: Mon Mar 27, 2023 2:50 pm Post subject: Injector clamp size question

Howdy folks,
I'm replacing my injectors with Marco's and, well, I don't know what size clamps to get, so I bought 1/2" and 3/8" pinch clamps at Home Cheapo. The 1/2 inchers are too big. Before I open this package up and have a hassle reurning them, do you think they'll fit? Bus depot has 7mm ID listed. These when converted are 9.25mm. But is that inside or outside? The package says they work for 1/8" (3.175mm) - 1/4" (6.35mm), but I don't want to mess around considering the implications and thought I would ask the pros here.

Thanks!

Tobias Duncan · Posted: Mon Mar 27, 2023 4:14 pm Post subject: Re: Injector clamp size question

Home depot has clamps rated for fuel injectors?

djkeev · Posted: Mon Mar 27, 2023 4:57 pm Post subject: Re: Injector clamp size question

jkaput · Posted: Mon Mar 27, 2023 5:00 pm Post subject: Re: Injector clamp size question

ALIKA T3 · Posted: Mon Mar 27, 2023 8:15 pm Post subject: Re: Injector clamp size question

The Oetiker clamps for the fuel injection hose (7.3mm and 5/16") is 14.5mm.

Plenty on eBay.
_________________
Silicone Steering Boots and 930 Cv boots for sale in the classifieds.
Syncro transmission upgrade parts in the Classifieds.
Subaru EJ22+UN1 5 speed transmission
http://www.thesamba.com/vw/forum/viewtopic.php?t=416343
Syncro http://www.thesamba.com/vw/forum/viewtopic.php?t=4...num+gadget


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Vanagon	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1