Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Source 24mm pr tube seals?
Forum Index -> Performance/Engines/Transmissions Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Author Message
71StandardReduction
Samba Member


Joined: December 04, 2012
Posts: 715
Location: Louisiana
71StandardReduction is offline 
PostPosted: Tue May 30, 2023 3:21 pm    Post subject: Source 24mm pr tube seals? Reply with quote
Putting a set of dp heads on a single port that someone put the spring collapsible type push rod tubes on.
The tubes are standard size on one end and the other is 24mm which would be the ID of the seal.

Anyone found any of these before?
_________________
One thing I ask from the Lord, This only do I seek:
That I may dwell in the House of The Lord all the days of my Life, to gaze on the beauty of The Lord and to seek Him in His Temple~Psalms 27:4

YHWH NISSI
YHWH SHALOM

64 Pan Buggy
https://www.thesamba.com/vw/forum/viewtopic.php?t=...mp;start=0

Ruby Red 1966
https://www.thesamba.com/vw/forum/viewtopic.php?t=779597&highlight=

https://youtube.com/@SCOFabwerx?feature=shared
Back to top
View user's profile Send private message Gallery Classifieds Feedback
71StandardReduction
Samba Member


Joined: December 04, 2012
Posts: 715
Location: Louisiana
71StandardReduction is offline 
PostPosted: Tue May 30, 2023 4:07 pm    Post subject: Re: Source 24mm pr tube seals? Reply with quote
Image may have been reduced in size. Click image to view fullscreen.

_________________
One thing I ask from the Lord, This only do I seek:
That I may dwell in the House of The Lord all the days of my Life, to gaze on the beauty of The Lord and to seek Him in His Temple~Psalms 27:4

YHWH NISSI
YHWH SHALOM

64 Pan Buggy
https://www.thesamba.com/vw/forum/viewtopic.php?t=...mp;start=0

Ruby Red 1966
https://www.thesamba.com/vw/forum/viewtopic.php?t=779597&highlight=

https://youtube.com/@SCOFabwerx?feature=shared
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Glenn Premium Member
Mr. 010


Joined: December 25, 2001
Posts: 76939
Location: Sneaking up behind you
Glenn is offline 
PostPosted: Tue May 30, 2023 4:16 pm    Post subject: Re: Source 24mm pr tube seals? Reply with quote
Since you're replacing the heads, it's the perfect time to use stock stainless steel tubes.
_________________
Glenn
74 Beetle Specs | 74 Beetle Restoration | 2180cc Engine
"You may not get what you pay for, but you always pay for what you get"

Member #1009

#BlueSquare
Back to top
View user's profile Send private message Send e-mail Visit poster's website Gallery Classifieds Feedback
71StandardReduction
Samba Member


Joined: December 04, 2012
Posts: 715
Location: Louisiana
71StandardReduction is offline 
PostPosted: Tue May 30, 2023 4:23 pm    Post subject: Re: Source 24mm pr tube seals? Reply with quote
I most likely will but I would like to know also whether u can get replacement seals for these, if not, I reckon they will be recycled at the scrap yard.
_________________
One thing I ask from the Lord, This only do I seek:
That I may dwell in the House of The Lord all the days of my Life, to gaze on the beauty of The Lord and to seek Him in His Temple~Psalms 27:4

YHWH NISSI
YHWH SHALOM

64 Pan Buggy
https://www.thesamba.com/vw/forum/viewtopic.php?t=...mp;start=0

Ruby Red 1966
https://www.thesamba.com/vw/forum/viewtopic.php?t=779597&highlight=

https://youtube.com/@SCOFabwerx?feature=shared
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Glenn Premium Member
Mr. 010


Joined: December 25, 2001
Posts: 76939
Location: Sneaking up behind you
Glenn is offline 
PostPosted: Tue May 30, 2023 4:26 pm    Post subject: Re: Source 24mm pr tube seals? Reply with quote
CB sells these:

https://www.cbperformance.com/product-p/1566.htm

Image may have been reduced in size. Click image to view fullscreen.

_________________
Glenn
74 Beetle Specs | 74 Beetle Restoration | 2180cc Engine
"You may not get what you pay for, but you always pay for what you get"

Member #1009

#BlueSquare
Back to top
View user's profile Send private message Send e-mail Visit poster's website Gallery Classifieds Feedback
71StandardReduction
Samba Member


Joined: December 04, 2012
Posts: 715
Location: Louisiana
71StandardReduction is offline 
PostPosted: Tue May 30, 2023 4:29 pm    Post subject: Re: Source 24mm pr tube seals? Reply with quote
Hmmm.... mine had stock style seals on each end and CB's look like 0ring style..... but they are 20 vs 24mm so they might just work.
If nothing else pops up, I will certainly try them.
_________________
One thing I ask from the Lord, This only do I seek:
That I may dwell in the House of The Lord all the days of my Life, to gaze on the beauty of The Lord and to seek Him in His Temple~Psalms 27:4

YHWH NISSI
YHWH SHALOM

64 Pan Buggy
https://www.thesamba.com/vw/forum/viewtopic.php?t=...mp;start=0

Ruby Red 1966
https://www.thesamba.com/vw/forum/viewtopic.php?t=779597&highlight=

https://youtube.com/@SCOFabwerx?feature=shared
Back to top
View user's profile Send private message Gallery Classifieds Feedback
txoval
Samba Member


Joined: January 23, 2004
Posts: 3552
Location: The Woodlands, TX
txoval is offline 
PostPosted: Tue May 30, 2023 4:35 pm    Post subject: Re: Source 24mm pr tube seals? Reply with quote
They look like Jaycee or FastFab tubes

Stock seals will work on both
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
71StandardReduction
Samba Member


Joined: December 04, 2012
Posts: 715
Location: Louisiana
71StandardReduction is offline 
PostPosted: Tue May 30, 2023 4:39 pm    Post subject: Re: Source 24mm pr tube seals? Reply with quote
txoval wrote:
They look like Jaycee or FastFab tubes

Stock seals will work on both


https://www.heritagepartscentre.com/us/ac1097001-f...3wQAvD_BwE

They do look very similar to those.
Have the little stainless washers on the stock size end also.
In the pic, does look like one end is larger on the seal area....
Are you just supposed to stretch a stock seal onto the tube?
_________________
One thing I ask from the Lord, This only do I seek:
That I may dwell in the House of The Lord all the days of my Life, to gaze on the beauty of The Lord and to seek Him in His Temple~Psalms 27:4

YHWH NISSI
YHWH SHALOM

64 Pan Buggy
https://www.thesamba.com/vw/forum/viewtopic.php?t=...mp;start=0

Ruby Red 1966
https://www.thesamba.com/vw/forum/viewtopic.php?t=779597&highlight=

https://youtube.com/@SCOFabwerx?feature=shared
Back to top
View user's profile Send private message Gallery Classifieds Feedback
vwracerdave
Samba Member


Joined: November 11, 2004
Posts: 15309
Location: Deep in the 405
vwracerdave is offline 
PostPosted: Tue May 30, 2023 5:04 pm    Post subject: Re: Source 24mm pr tube seals? Reply with quote
71StandardReduction wrote:
Are you just supposed to stretch a stock seal onto the tube?


Yes. Don't overthinking this. There has never been any special size seals for these push rod tubes.
_________________
2017 Street Comp Champion - Thunder Valley Raceway Park - Noble, OK
2010 Sportsman ET Champion - Mid-America Dragway - Arkansas City, KS
1997 Sportsman ET Champion - Thunder Valley Raceway Park - Noble ,OK
Back to top
View user's profile Send private message Gallery Classifieds Feedback
67rustavenger Premium Member
Samba Member


Joined: February 24, 2015
Posts: 9771
Location: Oregon
67rustavenger is offline 
PostPosted: Tue May 30, 2023 5:24 pm    Post subject: Re: Source 24mm pr tube seals? Reply with quote
vwracerdave wrote:
71StandardReduction wrote:
Are you just supposed to stretch a stock seal onto the tube?


Yes. Don't overthinking this. There has never been any special size seals for these push rod tubes.

In other words. The stock PR seals fit on the JayCee style PR tubes.

Yes the seals need to be stretched over the PR tube ends.
_________________
I have learned over the years.
Cheap parts are gonna disappoint you.
Buy Once, Cry Once!

There's never enough time to do it right the first time. But there's always enough time to do it thrice.
GFY's Xevin and VW_Jimbo!
Back to top
View user's profile Send private message Gallery Classifieds Feedback
71StandardReduction
Samba Member


Joined: December 04, 2012
Posts: 715
Location: Louisiana
71StandardReduction is offline 
PostPosted: Tue May 30, 2023 6:16 pm    Post subject: Re: Source 24mm pr tube seals? Reply with quote
Well, now I know and yep it worked just fine
_________________
One thing I ask from the Lord, This only do I seek:
That I may dwell in the House of The Lord all the days of my Life, to gaze on the beauty of The Lord and to seek Him in His Temple~Psalms 27:4

YHWH NISSI
YHWH SHALOM

64 Pan Buggy
https://www.thesamba.com/vw/forum/viewtopic.php?t=...mp;start=0

Ruby Red 1966
https://www.thesamba.com/vw/forum/viewtopic.php?t=779597&highlight=

https://youtube.com/@SCOFabwerx?feature=shared
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> Performance/Engines/Transmissions All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2023, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB
Links to eBay or other vendor sites may be affiliate links where the site receives compensation.