NOTEK German Military Convoy Light

[VWNYCMike]

Hello all, wondering if there is a period correct reproduction NOTEK German military convoy light available for purchase. I have seen original versions for sale on German eBay, but I would prefer to use a modern copy. Many thanks to all in advance, Mike

[2type2]

Since my 71 is a 82e tribute , I have sought a Notek front blackout light also There're some 50's-60's (?) versions sometimes available for purchase ebay, but the originals (WW2) show up on very rare occasion at $900+. I did find a " fiberglass mold for notek shield" once, but no signs of any repros
It doesn't look impossibly hard to make a replica, but not currently so motivated.Maybe someone on here with casting expertise could do it? Let me hear if you find anything.Maybe there's not enough demand, or Kdf repro guys would get on it.
_________________
"A life of peace and happiness depends on your own gratefulness"

[finster]

I assume by notek convoy light you are referring to the rear mounted one.
available here
http://www.repuestossam.com/en/kubelwagen/parts/k015.html

https://www.thesamba.com/vw/classifieds/detail.php?id=2664354
_________________
"we're here on Earth to fart around" kurt vonnegut

nothing lasts, nothing is finished, and nothing is perfect...

[VWNYCMike]

[VWNYCMike]

[2type2]

For a lot less than $900, I believe a reasonable knockoff could be made utilizing a lathe, some plumbing parts, and a cast or molded lid. Maybe somebody could try 3-D printer for the cover. Just sayin.....needs resources I don't have.
_________________
"A life of peace and happiness depends on your own gratefulness"

[finster]

this diagram could be helpful. I've seen reference to the notek tarnscheinwerfer being 235mm long and 170mm wide so this matches the illustration.

_________________
"we're here on Earth to fart around" kurt vonnegut

nothing lasts, nothing is finished, and nothing is perfect...

[gdettore]

Have been searching the web for the same thing, preferably a reproduction. No need to function, just for looks. So far, nothing has been found.

[2type2]

I would settle for a mock up also, considering everything. How about somebody here with a plastic printer give it a try with Finster's diagram to help? Or maybe a casting in aluminum?
I don't have the resources but some here do!
_________________
"A life of peace and happiness depends on your own gratefulness"

[T2_681]

https://www.kleinanzeigen.de/s-anzeige/notek-tarnscheinwerfer/2678492002-223-8606

https://www.kleinanzeigen.de/s-anzeige/notek-tarnscheinwerfer-2-stueck-wk-2/2693249861-223-9231

https://www.kleinanzeigen.de/s-anzeige/notek-tarnscheinwerfer-wehrmacht-2-wk/2668228536-234-2366

[DDub]

If they consistently sell for $900, why not buy one and make a fiberglass mold, then sell it. You may be able to sell a few to make it worthwhile. I don't think you understand how expensive a 3D printed one would cost. Besides you would have to have one for the programmer.

[T2_681]

€650 is not $900 but it is also a matter of fact that about 5 years back I bought a very nice front Notek for €250.

[volkaholic1]

does anyone have a sample, i got a 3D printed, 8"X8" so i think it would fit, if anyone has detailed drawing with all dimensions, i might be able to fab 1 up
_________________
Volkaholic

[Rome]

FYI, and the source of the Notek name- https://www.heraldnet.com/life/illuminating-the-wwii-german-vehicle-notek-light/

And explanation of the taillamps on Kuebelwagens- http://www.olgiati-in-paraguay.org/kubel/rearnova.html

[volkaholic1]

ok folks, notek lamps are still used by german miliary, i bought 1 years ago for a car i am slowly building, not the same, but similar, tag says i paid $120 for it

note is says NOTEK

today i just bought a real WWII notek helmet

so once i get it, i can figure out how to span it, but obviously, this is just the top, what to do about the rest? will need to compare to see what can be copied
_________________
Volkaholic

[finster]

the other main parts to make are the base/bulbholder and the reflector. the base is basicaly a flat D shaped plate with a boss underneath to take the clamping screw and a bulb holder on top. this should be quite easy to mock-up with plywood etc and a modern bulb holder, you have the mating shape area of the cover to guide you.
see this link https://www.olgiati-in-paraguay.org/kubel/Notek.pdf page 21

here is an advert for the parts on ebay, the photos are quite good for seeing the shapes (although the base plate is missing 2 corners)
https://www.kleinanzeigen.de/s-anzeige/notek-tarnscheinwerfer-wehrmacht/2693739546-234-3105

good luck
_________________
"we're here on Earth to fart around" kurt vonnegut

nothing lasts, nothing is finished, and nothing is perfect...

[splitjunkie]

A wood buck of the top cover and vacuum-form some polystyrene over it would probably be the cheapest way to make the cover if you know someone who does it for one off stuff.
_________________
Chris

You know, a lot of these scratches will buff right out... Jerry Seinfeld

[volkaholic1]

well this has some great detail drawings

see this link https://www.olgiati-in-paraguay.org/kubel/Notek.pdf page 21

i cant read german, but i dont think i need to to get the point
_________________
Volkaholic

[VWNYCMike]

Gents,
I purchased an original front fender NOTEK and it arrived this morning. I am going to clean it up a bit and begin the scanning process in the hopes of getting a 3D test product done. Keep you all posted !

[finster]

the race is on!

incidentally having found this downloadable file for 1/35 scale is it possible to scale it up to 1/1 scale. I know nothing about 3d printing
https://cults3d.com/en/3d-model/various/1-35-notek-tarnscheinwerfer-and-convoy-light/makes
_________________
"we're here on Earth to fart around" kurt vonnegut

nothing lasts, nothing is finished, and nothing is perfect...